The 20W X-band BUC is a satellite ground transport terminal that includes a receive rejection filter and performs IF-to-X-band upconversion using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as fan and temperature alarms. The unit provides a total gain of over 50 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.35 ppm.

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

EFFECTIVE RANGE : 600 m RIFLING : 1:7" Twist, 6 Groove R/H MAGAZINE CAPACITY : 30 rounds

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

Modern avionics and vectronics rely on high data rate digital networks. As the demand for these networks keeps rising with new advances in aviation and military technologies, GORE® High Speed & Data Rate Cables from W. L. Gore & Associates provide the fast speeds and excellent signal integrity needed to support current and next-gen critical systems.

Teledyne FLIR's Tau 2 series offers 40 variants of the most reliable and rugged longwave infrared (LWIR) thermal camera module. Equipped with a simple optica...

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

Safran Engineering Services offer includes EWIS technology design and certification, electrical requirements management, electrical systems architecture, definition and wiring architecture, components definition (BOM), electrical wire harness assembly, installation design, electrical load analysis, 3D modeling / 2D drawing creation, manufacturing tools (Formboard), work Instruction development and wire harness installation design.