The Haigh-Farr Wraparound™is a self-contained, omnidirectional antenna for cylindrical or conical shaped vehicles. A single point feed is used and no external splitters, combiners or cable harnesses are required for installation. The antenna may be mounted flush, or on the exterior of the vehicle.

The SCXMC-AURORA is one of Seedcore’s flagship products, designed for high-speed optical data communication through an XMC interface. Utilizing the Xilinx Aurora 64B/66B protocol, it supports four transmit/receive channels, each operating at 10.3125 Gbps via integrated optical transceivers. A device driver program is required for operation, and the Linux driver can be downloaded from the product information page on Seedcore’s website. This module is deployed in the M-SAM air defense system, providing reliable and high-speed data transfer between mission-critical embedded components.

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

Specification Array Format : 1280 × 1024 Pixel pitch : 10㎛ Spectral range : 0.9㎛ ~ 1.7㎛ (SWIR) Operability : ≥ 99.5% Quantum Efficiency : 70% @ 1550nm Application Near-infrared Imaging Imaging Spectroscopy Surveillance Medical Science and Biology Astronomy and Scientific Material inspection Food inspection Forgery detection

We carry a wide range of aerospace-grade materials in round bar, including: -Alloy 718 (AMS5662, AMS5663) -Alloy 625 (AMS5666) -Alloy X (AMS5754) -Titanium Grade 5 (AMS4928) -A286 (AMS5732, AMS5737) -17-4PH (AMS5643) -17-4PH H1025 (AMS5643) -321 Stainless Steel (AMS5645) There is no minimum order quantity ? we can cut from a single piece and ship within 1?2 days, complete with full material traceability. For non-stock grades, shapes, and standards, we can source materials from suppliers worldwide with a lead time of approximately 2 weeks, also with no minimum order quantity.

Glenair offers its connector and connector accessory customers every convenience in the provision of contact termination, shield termination, and backshell-to-connector assembly tooling. We are also proud to offer branded solutions from other well-known tool manufacturers such as Daniels (DMC) crimp tools. From pneumatic Earth-Bond tooling for the rail industry, to fiber optic termination and test equipment, Glenair is your most knowledgeable and reliable source for special-purpose interconnect assembly tooling. Our complete selection of manual shield termination and pneumatic bench-mount banding tools are the most prized in the industry. Only Glenair Band-Master ATS offers an integrated counter to ensure reliable, repeatable banding and calibration.

The World's Most Complete Selection with Lightning Fast (Same-day!) Availability for: AS85049 (M85049), D38999, MIL-DTL-26500, MIL-DTL-28840, MIL-DTL-83513, MIL-DTL-83538, MIL-DTL-83723, MIL-S-81824, MS17349, MS27291 and Other Military Standard and Commercial Backshell Derivatives.