The MIL-DTL-5015 series of connectors were developed as military standard connectors and applied to various military equipment, it is also used in general industries, medical care, electric vehicles, robots and automation facilities based on its high durability and reliability. This series is threaded coupling and the connection between the contact and the wire is based on soldering. It can be used compatibly with third-party products of the same standard since it is produced according to military standards.

The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.

The A-C series is the most lightweight and low profile altitude switch in the Precision Sensors product line. The capsule based sensing element provides repeatable and precise absolute pressure threshold detection by sensing changes in the ambient air pressure compared to an evacuated capsule. The skeletal construction removes the need for bulky pressure fittings.

Typical uses include aircraft cabin air pressure monitoring.

For an environmentally sealed alternative, refer to the E-C series. For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Low profile skeletal design
Ni-Span-C capsule provides superior setpoint stability over temperature
Custom configurations available upon request

Poongsan participates in the defense industry based on its production technology for copper and copper alloy products, which are the basic materials for ammunition, and has large-scale dedicated production lines for each type of ammunition at its Angang and Busan plants, supplying everything from 5.56mm small-diameter ammunition to 155mm howitzer shells for the military. We develop and supply all types of ammunition for use. Poongsan has an integrated production system that not only procures materials and parts such as new ammunition, propellants, and links, but also fills and assembles gunpowder, thereby achieving high competitiveness in quality, price, and delivery. Poongsan produces ammunition of various types and calibers, including anti-aircraft shells, mortar shells, howitzer shells, tank shells, recoilless rifle shells, naval artillery shells, and aviation shells. In particular, in recent years, new types of ammunition have been developed, such as anti-tank ammunition with improved penetration, range extender ammunition with dramatically extended range, Goal Keeper ammunition used in Korean destroyers, and dual-purpose ammunition that can suppress tanks and multiple troops at the same time. We are also achieving great results in improving the performance of conventional ammunition. Additionally, MLRS (Multiple Launch Rocket System) and are responsible for the production of combined warheads including submunitions, which are key components. Poongsan operates an independent quality control organization separate from the production division, and in particular, has a perfect quality assurance system, with each process and lot undergoing strict inspection by a government inspection agency. Poongsan will continue to contribute to independent national defense by improving the performance of existing ammunition based on a consistent production system and advanced quality control system, and by promoting continuous research and development of advanced precision ammunition in line with the changing trends of modern warfare, which is becoming more advanced due to scientific development. It will.

The IntuVue RDR-7000 is fully automatic and does'nt require active pilot adjustments of tilt and/or gain for operation. Reducing workload, allows pilots to focus on flying the most comfortable and safest route through weather. Engineered to provide far superior reliability, accuracy and durability than legacy magnetron-based radar systems, the RDR-7000 offers customers the flexibility to remotely enable advanced software features to provide them the clearest view of weather conditions around the routes they’re accustomed to flying. Key Honeywell Advantages: Next generation -fully automated, higher resolution weather radar system with airborne ground/sea mapping system Reliable and efficient - solid-state transmitters utilizing pulse compression provide reduced weight and power consumption, advanced coherent processing, and increased reliability Compact and easy to install - RDR-7000 IntuVue radar systems technology integrated into a small, lightweight package Available software upgrades - advanced features can be added at any time, including turbulence detection, advanced mapping, target detection and additional hazard features (lightning and hail detection), and forward looking (predictive) windshear Honeywell's RDR 7000 Radar helps in operational costs savings by reducing the delays & downtime caused due to hailstorm, weather incidents and windshears while optimizing routes to reduce diversions and turnbacks.

ㅇKey Features -Provide communication Interface of at least 100Mbps -Ensuring a fixed bandwidth of communication processors and providing a deterministic communication environment by utilizing Virtual Link(VL) and BAG method -Provide SNMP, UDP, TCP, ICMP protocols ㅇQuality and Certification - DO - 178B DAL A - MIL-STD-810G - MIL-STD-461F

An educational technology learning system in which operators (instructors/student pilots/mechanics) proceed and manage learning through interaction with computers outline Summary • Development of defense CBT/CAI for theoretical education of domestic/international pilots and mechanics •Development of CMI, LCMS for trainee grade management, progress management, and content data management ・Research and construction of a hands-on learning system for applying the latest media •Learning content reuse and version management possible (SCORM standard applied)

The JW22992 connector was developed for the purpose of high-power transmission with demanding military standards and exhibits IP67-grade water and dust resistance. It is also designed in the range of 40 to 200 amps and is used for high-power military and industrial equipment that requires the highest reliability. Key Features: High Power Transmission, Designed to handle high currents, Robust construction It provides a stable connection with five key grooves and two-line screws.