In harsh theaters of battle and other challenging environments, electronic sensors that decision-makers depend on for signals intelligence can fail, be blocked, or may not be present. That can leave forces unable to detect threats, protect assets, or see and evaluate opportunities to advance the mission.

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

HII ensures the flight readiness of aircraft worldwide, providing mission-critical test, weapon loading and hydraulic power generation equipment, parts and services for both military and commercial end markets.

The ACTUS® IR Flashlight emits a low output of less than 100mW with a wavelength range of 830 to 875 nm, classified as a Class 3B laser. Designed for reliable performance in extreme environments, it can withstand specific storage and operating temperature ranges. Powered by a single CR123A lithium battery, it offers extended operational time, while its robust 6061-T6 aluminum construction ensures durability. The lightweight, compact design makes it easy to carry and use in the field.

Features ● Wideband Frequency Range of 2.0~18.0GHz ● Rigid Construction with AL Brazing ● Monotonic Beam Shape, No Beam Split ● Optimized Gain Ripple and VSWR Applications ● General Purpose TX/RX Antenna ● EMC Testing ● TX/RX Antenna for EW Testing ● Wideband TX Antenna for Anechoic Chamber

Drone Hunter XD is a handheld anti-drone solution that can quickly detect, identify, and track drones, providing swift onsite responses to drone threats within a 360-degree range of over 2km. Drone Hunter XD effectively neutralizes the frequencies of either a single drone or multiple drones approaching the blind spots of a fixed-type jammer, due to its receiving real-time access to information on detected DJI Drones, including S/N, model number, frequency band, azimuth/altitude angle, speed, and location.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

characteristicRear wheel drive type (5 forward speeds, 1 reverse speed) Cable Remote Control Type 2nd and 3rd speed Triple Synchro applied apply2.5-ton trucks and medium-sized buses, 3.5-ton trucks and medium-sized buses