A ground control system that establishes unmanned aerial vehicle missions, controls aircraft and mission equipment, reads image information, and transmits it to higher-level units.

The ENS2000 (Sub-6GHz 5G small cell) is a small cell capable of providing 5G services with a coverage radius of several hundred meters. It supports operator 5G bands such as n78 (3.5GHz) and n79 (4.7GHz) for private 5G. Originally developed for indoor use, but it can also be installed in enclosures such as streetlight cabinets for outdoor deployment when needed.

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

Spring probes provide reliable electro-mechanical performance through hundreds of thousands of cycles. They are available in a variety of sizes, spring forces and terminations. Smiths Interconnect compression mount connectors utilizing spring probe technology offer tremendous advantages in reliability, performance and efficiency in comparison to conventional technologies like stamped metal, wire mesh, pin-and-socket or elastomer. Standard spring probes offering includes battery contact and connector probes designed to optimize contact performance in high-reliability, multiple-cycle interconnect applications.

Green Optics possess proprietary CVD-based Zinc Sulfide (ZnS) production technology for defense and industrial multi-wavelength optical materials. We have core technological capabilities to manufacture high-quality ZnS products tailored to meet diverse customer requirements. ZnS Material Optical Performance and Processing ZnS materials produced through CVD processes provide high transmittance exceeding 70% in the SWIR wavelength range (8-12 μm). When these materials undergo additional Hot Isostatic Pressing (HIP) treatment, the crystal structure undergoes recrystallization, improving transmission characteristics to achieve over 70% transmittance in the visible (VIS) wavelength range of 0.45-0.8 μm. This process extends the application range of optical materials previously limited to SWIR and LWIR bands, delivering superior optical performance across multi-wavelength regions from VIS to LWIR. Material Specifications: - STD-ZnS (Standard ZnS Material): Manufactured via CVD process, exhibits transmittance exceeding 70% in LWIR wavelengths (8-12 μm) with high physical hardness (Knoop hardness: 210 kgf/mm²). - MS-ZnS (Multispectral ZnS): Converted from STD-ZnS through HIP processing, extends wavelength range into the visible spectrum. While crystal structure recrystallization during this process reduces hardness somewhat (approximately 150 kgf/mm²), it still meets MIL specifications. This dual-processing approach enables comprehensive wavelength coverage while maintaining military-grade durability standards.

The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base (including 10 Taps) configurations (CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Maximum transmission distance: 2000 m.  Enables lossless transmission.  Supports all external full-duplex RS232 communication speeds on a single port.  Features a locking DC power jack (Molex).  Camera link Connector Type : SDR connector.

AquaShieldIR key benefits: Water repellency: creates a water-repellent surface on IR imaging lenses, preventing water droplets from adhering. This feature ensures clarity and visibility, even in rainy or foggy conditions. Enhanced visibility in wet conditions: by repelling water droplets, AquaShieldIR™ enables IR imaging lenses to perform optimally in wet conditions. Improved Image Quality: thanks to the preventions of water droplets and contaminants from adhering to the lens surface, resulting in improved image quality.

Continental connectors are manufactured with highest quality materials. Our contacts are machined to close tolerances as opposed to stamped and formed styles. All molding compounds are glass reinforced, flame retardant and able to withstand severe environmental and mechanical requirements. Military connector families conform to the highest Defense Supply center (DSCC) standards, which require qualification testing and continued periodic requalification under the surveillance of government representatives to maintain our Company Qualified Product Listing (QPL)