The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.

Fast connection and disconnection are possible, and it provides a stable connection against vibration or shock. It is IP67-grade waterproof and can be used in humid or dusty environments. It also provides the ability to shield electromagnetic interference (EMI). Key uses: Military communications equipment, orbital vehicles and rail vehicles, aerospace industry, electric vehicles and unmanned systems, industrial equipment.

Your Benefits: Stunning Image Quality SWaP-Optimized, Smallest Shape, IP69K Protection Ultra-Low Latency G2G (Glass-to-Glass) Frame Rate: 60 Hz Increased Optical Resolution 2.1 MP, 1920 x 1080 Dynamic Range: 120 dB Integrated Heater for De-Icing / De-Misting FoV 53°, Alternatives tbd

Saab's Electronic Warfare (EW) Countermeasure Dispensing Systems (CMDS) for airborne platforms provides self-protection in sophisticated, diverse and dense threat environments for your mission success and safe returns.

New generation hydraulic test stand built with hydraulic purification system keeping aircraft flight safer and reduce significantly aircraft maintenance cost.

POSITAL's incremental encoders feature a simple internal structure and provide precise positioning information, allowing customers to flexibly address any challenges they encounter in the field. POSITAL's absolute encoders are available as single-turn or multi-turn encoders, offering the advantage of selecting the right configuration for your installation environment from a variety of mechanisms and connection configurations. POSITAL's kit encoders, based on Wiegand technology, store positioning information in real time without relying on batteries, providing a smart and economical solution.