With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Based on GaN, Si RF, and GaAs processes, Advance RF provides integrated solutions from chip design to modules and systems. We supply high-performance, highly reliable RF products for wireless infrastructure, satellite communications, automotive electronics, industrial measurement, and aerospace. Advance RF's product line consists of GaN, GaAs, and Si RF-based products, and in various configurations, covers a wide frequency band from DC to 100 GHz. Advance RF provides high-performance RF solutions optimized for a variety of applications, and its broad product portfolio allows for flexible design responses to customer needs. We have a rapid development cycle and stable mass production capabilities that enable rapid response to new sampling. Based on our own assembly plant, we maintain a development and mass production system capable of handling all aspects of customization, modularization, and reliability testing in-house.

Quadro Versa expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to satellites weighing up to 1000 kg and flying on SpaceX Rideshare plates. Versa has been designed for compatibility with the SpaceX four-point interfaces, and it is easily scalable to any size from 24”x24” up to 40”x40”. Larger satellites over 1000 kg and with larger footprints are also served by Versa, which offers unrivaled strength, stiffness and reliability for four-point satellites of any size.

- Rader · Detection Range : 1.5~10km, Customizable · Radar Type : AESA - LONG RANGE EO/IR · Identification Range : 3.0km · Optical Zoom : 66x (EO), 22x (IR) - JAMMER · Jamming Distance : 20km (GNSS), 10km @2km (ISM) - RCWS (REMOTE CONTROLLED WEAPON SYSTEM) · Weapon : 40mm AGL, 12.7mm MG · Ammo Capacity : 48 rounds (AGL), 200 rounds (MG) · Lethal and Nonlethal 40mm Air Burst Munition Fireable

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

This product is designed and manufactured to meet customer needs, including power and signal transmission for all weapon systems in the Korean military's land, sea, and air sectors.

Mini size - Shell size 11
Compatbile With: TE Pro Beam mini, QPC Qmicro, Stratos HMC, Fibreco Mini2

The HXB11 Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments.

FEATURES
· Advanced expanded beam technology
· Rugged field deployable fiber optic connector
· Hermaphroditic interconnection
· 2 to 4 Optical Channels for Singlemode or Multimode
· Custom configurations available
· Environmental sealing (IPX8)
· Very high resistance to vibration, shock, environmental effects, dust, and debris

Dim. : 2"W High strength type 13 webbing 2 rows of 1/2" MOLLE webbing Removable antimicrobial/FR treated spacer mesh pad 2" Cobra® buckle Vertical pull test 6,800 lbs +/-5% Loop/hook selectable at the inner Velcro Composition Material : 500D Cordura® + ARAMID / PV® Size : SMALL 32" - 35.5" MEDIUM 34.5" - 38" LARGE 38" - 41.5" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)