Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

A wire harness in military or aerospace applications is an assembly of wires, cables, connectors, and protective components designed to organize and route electrical and signal connections efficiently

Between Earth and space: stratosphere-compatible, solar-powered high-altitude aircraft, known as HAPs (High Altitude Platforms), offer a sustainable alternative to satellites for Earth observation and communication. They are reusable, cost-effective and flexible in use. The DLR joint project HAP-alpha is developing such a technology demonstrator and is endeavoring to establish a complete system capable of permanent operation. The aim is for DLR to build up comprehensive expertise for the development of high-performance, high-flying solar aircraft and to play an active role in shaping the legal framework. In summer 2025, the HAP-alpha successfully passed a ground vibration test.

BAE Systems has acted as the manufacturer and systems integrator of the Bradley program for over 30 years, including conducting various upgrades based on customer needs and mission requirements. The newest Bradleys feature the latest digitized electronics for optimum situational awareness, network connectivity, and communication within the ABCT. Over the life of the Bradley program, there have been several survivability upgrades, including installation of underbelly protection and the Bradley Urban Survivability Kits (BUSK), further enhancing the safety of one of the most survivable vehicles in the fleet.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

SSPA 기술을 접목한 고효율 선박용 레이다 및 공항감시용 레이다 시스템 국산화 개발을 통해 다양한 레이다 제품의 RF 핵심기술을 독자적으로 확보하였습니다.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.