ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

The SBC6511 Rugged Single Board Computer(SBC) from Abaco Systems features the new high performance, highly integrated Intel® Xeon® E processor (‘Coffee Lake Refresh’). Powered by Intel® Xeon® W processors, offering robust computational power. • Supports up to 64 GB DDR4 SDRAM with ECC and up to 256 GB (or in some variants up to 480 GB) NVMe SSD storage • Offers high-throughput networking: Dual 40 GbE data-plane (KR4 “fat pipes”) • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA (ZU7EG) for enhanced security

High density, lightweight signal connector specifically designed for applications where space and weight is at a premium for board to board interconnections. The HDLP series meets the requirement of space-constrained applications that require low mating force, a high number of mating cycles, low and stable contact resistance, and excellent fretting corrosion resistance.

THETIS-M2 is a multifunction thermal imaging system that provides soldiers with an advanced, light weight solution for day and night reconnaissance, surveillance and forward observation purposes. It also gives the blue forces a real-time target acquisition and target coordinate calculation capabilities. Thermal Camera + Direct View Optic +Laser Range Finder + Digital Magnetic Compass + GPS

Safran’s TG600 is a 600 kW hybrid-electric turbogenerator—derived from the Arrano turboshaft and paired with GENeUS generators—designed to serve as the core propulsion component for Electra’s nine‑passenger eSTOL aircraft.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The PANDION Q450 is a modular drone that allows users to swap out its detachable D-ARK module pack, enabling flexible configurations of cameras and internal PCBs. As the drone industry diversifies, users can select purpose-specific module packs, allowing a single product to meet various consumer needs with multiple configurations. The D-ARK module pack integrates the camera, flight controller (FC), and all circuitry, allowing users to upgrade, modify specifications, or perform maintenance simply by swapping the module. Designed to offer an optimized configuration for a wide range of users, this modular system provides a cost-effective solution tailored to diverse needs in the drone industry. PANDION Q450 has a solid design with water and dust resistance for rugged environments.

Sourcehere is a digital platform for connecting buyers and suppliers quickly and easily. Buyers can quickly find suppliers and products in their industry and connect with them from anywhere at any time. For suppliers, Sourcehere offers access to a vast global marketplace through its searchable directory. Even if you are not at the show, our on-platform messaging lets you contact suppliers and representatives directly from anywhere in the world.