The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

The reference timing is used as the standard time for many tasks linked in various fields of industry and society. Especially precisely synchronized timing information and signals are widely used to keep mobile networks synchronization and generate precise time and frequency. In addition, it is being utilized in various ways such as power protection system for power generation and load management of each power plant according to smart grid issue, military satellite communication, electronic warfare signal detection and command control communication system. Features NTP Related Content Timing Accuracy (1PPS): ± 100ns or less Providing Various Frequency Outputs According to User's Requirements GPS L1 Signal Synchronization Event Logging and Network Remote Management Available for operators ODM / OEM Supply Available Proven Stability Through Various Performances of Mobile Communication Network and Power Protection System Providing IRIG-B (TTL, SINE) Signal Input / Output Interface (selectable according to User's Requirement) Providing GPS NMEA in Message API form (N220) Providing PCIe Interface

A wire harness in military or aerospace applications is an assembly of wires, cables, connectors, and protective components designed to organize and route electrical and signal connections efficiently

High density, lightweight signal connector specifically designed for applications where space and weight is at a premium for board to board interconnections. The HDLP series meets the requirement of space-constrained applications that require low mating force, a high number of mating cycles, low and stable contact resistance, and excellent fretting corrosion resistance.

Patria OPTIME covers a broad range of services and solutions impacting the fleet availability, such as fleet maintenance, upcoming modification projects and needed integrations in the later stages of the lifecycle as well as supply chain management and training services. Patria OPTIME is a modular service model that is always tailored to the customer needs and requirements, and it is set up in phases together with the customer. Patria OPTIME combines top-notch engineering expertise with efficient data utilization in a unique way for the sustainment of military equipment. There is no comparable, comprehensive, manufacturer-independent and data-driven solution that can be deployed in all operating environments available from other market actors. It is a data-driven concept, which ensures the performance and cost-effective operation of the fleet. In the centre of the concept is data collection from the fleet usage and maintenance. Even during a crisis, the customer can count on Patria’s support. Patria’s service covers the entire lifecycle of the fleets The lifecycle for military fleets is typically decades-long – and thus, in addition to ordinary maintenance, repairs and overhauls, the fleets must undergo major upgrades, repairs and system/structural modifications during the lifecycle to fulfil required capabilities. Patria has strong experience and expertise in all these demanding activities – for land vehicles, aircraft and marine vessels. Patria OPTIME also covers the management of fleet MRO supply chains, as required by the customer. Data analysis makes it possible to anticipate the future need for spare parts and to optimally plan the deliveries and storage of these parts. The concept of operations of high-performance assets is also essential part of effective system usage. Patria can support this with years of experience in data collection from a range of fleets as part of mission support services. This brings exclusive offering for Patria’s training services. For instance, in Finland, Patria is responsible for elementary and basic pilot training for the Air Force, Army and Border Guard and provides training services for maintenance staff. Patria OPTIME is set up according to the customer’s requirements The specification of the Patria OPTIME solution begins with an assessment of the current state of the customer’s operating environment, equipment and sustainment solution as well as the requirements set for them. After a successful feasibility study, there will be a more thorough value proposal phase together with the customer. Patria OPTIME ensures the performance of different kinds of fleets in all conditions over their entire lifecycle.

- Inspection robot control and damage assessment for robot operators. - Pre-inspection information creation for inspection planning. - A 3D user interface for inspection robot status monitoring. - Damage assessment and result report generation capabilities.

Sungjin Techwin’s control grips are designed to provide pilots with intuitive and precise control in critical missions. Engineered with ergonomic layouts, high-reliability switches, and NVIS-compatible backlighting, our grips are fully customizable to meet diverse cockpit requirements. Qualified under MIL-STD and DO-160 standards, they ensure durability and safety in extreme operational environments. With proven applications across programs such as KF-21, KUH, LAH, and the Calidus B-250, our control grips demonstrate world-class performance and trusted reliability for next-generation aircraft.

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.