From briefing to touchdown and beyond, Fpo gives crews fully actionable recommendations on the most cost-efficient way to complete their flights under the current conditions, carefully balancing operational considerations with passenger comfort and on-time performance. Fpo holistically optimizes all phases of flight from climb to descent, relying on high-fidelity and real-time data to deliver information that is accurate, relevant and complete. Always raising the bar, we have partnered with Nexteon Technologies to introduce a multi-dimensional optimization solution, FPO•SR, which combines vertical and lateral flight optimization capabilities.

A hallmark of the U.S. economy is its vibrant and innovative services sector. U.S. services are respected globally, opening the door for American companies t...

MDCX, multipin coax connectors, offer low VSWR of 1.25:1 (typ) up to 10 GHz (max mated pair), maximum overall diameter of 0.125" fitted into low-profile micro-D housing, with constant 50 Ohm airline impedance. MDCX coaxial contacts are compact in size allowing multiple high density connections in a Micro-D style shell for applications where space and weight savings are important. No cumbersome spring mounts are required. These connectors are also available with locking post mechanisms or blindmate hardware attachment.

Type : Axial (3P) Size(Ø, mm) : 310 × 109 Weight(kg) : 37 N. Speed(rpm) : 2100 N. Torque(Nm) : 450 N. Power(kW) : 100

FINISHED THE DEVELOPING / INTEGRATED THE 2CH. FORJ Specification MODEL: SREM-1466-012 APPLICATION: SONAR WINCH SIZE: Φ140(O.D) / 664(H) NO. OF RINGS: 128RINGS TYPE: END ROTATING: CW/CCW

Its unique tail-sitter design enables vertical takeoff and landing while maintaining fixed-wing efficiency during flight. The drone achieves high-speed performance and extended flight distances, making it ideal for wide-area monitoring. With its advanced endurance and adaptability, GOSHAWK delivers reliable intelligence in both tactical and strategic operations.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.