Due to its lightweight nature, TYTO 100 can transmit photos/low-resolution video from Manned and Unmanned Platforms beyond line of sight. TYTO 100 features an all-in-one Certus SFX module and antenna, with power supply. Wi-Fi and Ethernet Connectivity can be easily paired with existing customer devices, and Global Satellite Connectivity can be added. The TYTO 100 can also be used as Standalone mode with built-in Battery.

The static-dynamic mixer vipro-DUOMIX is perfectly suited for compressible, two-component materials – with very different viscosities, extreme mixing ratios and high-pressure sensitivity. The extended version with optimized mixing blocks for low-viscosity, and high-viscosity materials on either side brings a further advantage: It is ideally suited for materials that are difficult to mix – with different or identical viscosities. A modular design with five different dispenser sizes per side allows complete flexibility. And a wide range of mixing ratios from 1:1 to 100:1. The vipro-DUOMIX can be used for complex two-component applications in diverse industries such as automotive manufacturing, aerospace, or electronics. Irrelevant of whether it is for a dot dispensing, a bead application or for a potting application. Particularly in the production of aircrafts the static-dynamic mixer is used for honeycomb potting or for edge sealing. Special nozzles with adjustable bead width are available for this purpose. A wide range of two-component materials based on e.g., polyether, epoxy resin, silicone or polyurethane can be dispensed in all areas of application. Due to the parallel alignment of the dispensers, and due to a weight-optimized design, the vipro-DUOMIX is very compact – ideal for assembly in robotic cells or for automated applications.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The ACTUS® PARA-3M is a mission-critical magnifier designed for rapid and precise targeting of close- to mid-range threats in high-intensity operational environments. With a 3x magnification, it enhances accuracy and adaptability, ensuring superior performance in dynamic combat situations and supporting both near and long-range precision shooting for mission success.

Engine Start Begins with ATS. The Air Turbine Starter (ATS) is a key component of an aircraft's secondary power system, driven by Bleed Air supplied from the Auxiliary Power Unit (APU) to accelerate the engine up to approximately 8,900 RPM, enabling engine start. Through the in-house development and localization of the ATS, we have incorporated power generation, optimal design of the shear section with consideration of failure, Containment functionality, as well as lubrication and power transmission systems. In addition, we have secured manufacturing and assembly technologies and continue development aimed at successful operation and the establishment of a mass production system.

- We have developed a lightweight AAM/UAM seat using composite materials, achieving a weight reduction compared to conventional seats. - A modular design that accommodates various aircraft models allows for customization according to the needs of each customer. - A design compliant with aviation safety regulations, utilizing our existing EASA DOA (Design Organization Approval).

FSI is an authorized stocking distributor for Avdel/Pop, AVK, Cherry Aerospace, Gesipa USA, Huck, Sioux, Makita Assembly Tools and Zephyr Tool Group, Monobolt and Magna-Lok

External SSD drive with total data delete option by hotkey or red button push Highly robust solution due to the use of a full-aluminium chassis Highly customizable Native supported four inputs for Full HD SDI cameras