FLIR's man-portable soldier solutions are lightweight, powerful, and easy to use, making today's warfighter more capable and more agile on the battlefield than ever before.

The IMX-5 delivers Tactical Grade Inertial performance powered by TWO of the most powerful GNSS receivers on the market. Inside the aluminum enclosure, this sensor is prepared to take you through difficult terrain. The IMX-5 provides sensor fusion for roll, pitch, magnetic heading, velocity, RTK precision position and Dual GNSS Compass Heading. Features Tactical Grade IMU Dual Onboard Multi-Frequency (L1/L2) GNSS Receivers Dual GNSS Compassing RTK Centimeter Level Precision Rugged IP40 Aluminum Enclosure Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

LiFi is a technology that uses 'light' to transmit data instead of using conventional radio waves. LiFi is attracting attention as a future communication technology that can complement or replace the widespread WiFi. LiFi will be applied for the first time in the civil aviation industry and bring great innovation to in-flight communication and entertainment. LiFi's ultra-connectivity, ultra-security and ultra-resiliency are key elements that will enable LiFi technology to 'spin-on' to the defense industry.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The beginning of the mission given to ammunition The mission of all ammunition begins with the fuse. We are developing and mass-producing fuses based on our many years of experience in developing and mass-producing various fuses to meet the needs of users, including electronic timed fuses, mechanical fuses, and training fuses. Completion of mission given to ammunition Warheads such as penetrating warheads for penetrating power, thermobaric warheads using thermal pressure, and dispersion warheads for suppressing local targets play the role of completing the final mission of the ammunition. Korea Defense Industry has many years of experience developing and mass producing such warheads.

Our clamping division manufactures parts to secure external lines and tubes to the landing gear fitting and oleo.

Duratek's power supplies and power distribution units are designed and manufactured to generate and distribute stable electrical power required by equipment, tailored for defense applications in naval, ground, aerospace, and space environments.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.