A distributed sensor system based on BOTDA (Brillouin Optical Time Domain Analyzer), capable of detecting structural deformation and external intrusion.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

With durable constructions, GORE-FLIGHT Microwave Assemblies provide reliable performance for critical aircraft systems. To improve signal integrity and reduce interference, they incorporate shielding that meets and even exceeds the 90 dB requirement. A consistent impedance of 50 ± 1 ohms ensures a lower insertion loss and more reliable VSWR than leading competitors, both before and after installation. GORE-FLIGHT Microwave Assemblies also deliver the following benefits: Durability for the Life of the System Cost-Saving Performance

BAE Systems is transforming the future of flight with solutions to enable hybrid and all-electric powered aircraft. We bring decades of demonstrated cross do...

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

SJP’s special parts are custom-designed and manufactured to meet unique requirements that standard components cannot fulfill. With our advanced R&D capabilities and state-of-the-art CNC multi-tasking machines, we handle complex geometries, tight tolerances, and special materials with precision. These parts are widely used in medical devices, semiconductor equipment, precision instruments, and aerospace & defense, where reliability and high accuracy are essential. From rapid prototyping to full-scale production, we deliver end-to-end solutions that shorten development cycles and enhance product competitiveness.

Maintenance Increase security and productivity to reduce costs and minimize downtime. Willing to provide our customers with high-performance technical assistance, we offer scheduled and unplanned maintenance interventions, as well as periodic verification of measurement channels using our calibration equipments. Our systems allow us to perform these operations internally or at our customers site.

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.