The SWE550S is a rugged 6U VPX fully managed Layer-2/3 Ethernet switch aligned with the SOSA profile, providing blazing-fast 25/100 GbE switching via a 3.2 Tbps fabric and flexible I/O reconfiguration. • 3.2 Tbps switch fabric delivering full wire-speed bandwidth (~2.5× typical) • Front: up to 2×100 GBASE-SR4 (MPO); Rear: up to 7×100 GBASE-SR4, SWE540A-compatible I/O • Fat-pipe ports reconfigurable into thin-pipe ports; copper ports support 25/100→10/40 Gb speed downgrade • Dual-core ARM + OpenWare™ management; built-in storage sanitization • SOSA-aligned 6U VPX form factor; air & conduction cooled; rugged Levels 1, C, E

Maximum Control for your interactive graphical displays. Developing HMIs for safety- and mission-critical avionics and embedded displays only gets more demanding. VAPS XT offers HMI designers, systems engineers, and embedded engineers maximum control and flexibility for creating interactive real-time graphical displays for avionics and other safety-critical embedded applications. With an open architecture and integrated logic capabilities, VAPS XT provides the essential features for the design and deployment of certifiable cockpit displays. VAPS XT provides a model-based environment supporting all phases of development from initial concept to embedded deployment. Through a flexible porting structure, VAPS XT applications can be easily deployed to virtually any embedded target with excellent performance.

ts advanced integrated optics and closed-loop Field Programmable Gate Array (FPGA) electronics deliver much higher accuracy, lower noise and greater efficiency than competing technologies. In addition, the EG-1300 can be calibrated internally for better thermal effect and has both digital and analog outputs, along with separation of the electronics from the FOG’s sensing coil assembly to accommodate the widest variety of installation parameters. Features Fully-integrated optics and electronics Advanced optics and FPGA electronics for higher accuracy, lower noise and greater efficiency Precise navigation (1 mile/hour without GPS) Fast, precise gyrocompassing to 1 milliradian Bandwidth to 500 Hz Separate electronics and sensor modules More economical than competing systems Applications Navigational grade applications Unmanned aerial vehicle (UAV) guidance Missile guidance Aeronautics and aviation Robotics

SeaHFlight is an advanced 2D/3D GIS-based command and control solution engineered for the comprehensive management of low-altitude aircraft, including helicopters, drones, and future UAMs. It provides a complete operational picture, offering full lifecycle management from initial flight planning and real-time monitoring to post-flight performance analysis. Key Capabilities: Unified Situational Awareness: Achieve superior decision-making with a dynamic 2D/3D operational map that visualizes all air assets in real-time. The system integrates crucial data layers, including weather, airspace information, and flight plans. End-to-End Mission Management: Streamline the entire operational workflow, covering everything from flight plan creation and pilot hour management to flight history recording and detailed performance evaluation. Proven Interoperability: SeaHFlight is designed for seamless data integration with key national and military agencies (Army, Police, National Fire Agency, Forest Service). This creates a unified network for complex, multi-agency public safety or defense operations. Future-Ready Platform: Built to manage not only current helicopter and drone fleets but also the next generation of Urban Air Mobility (UAM), SeaHFlight is a scalable, long-term solution for modern aviation.

Duratek’s motor drive power supply is engineered to absorb excess energy during motor regeneration and braking phases, ensuring consistent and stable voltage delivery.

The EL4000 is an RU/DU-integrated LTE outdoor base station that provides long-distance LTE service outdoors and has been supplied through KT for the Ministry of Oceans and Fisheries’ LTE-M network.

The NSP-8 is IMSAR’s most powerful radar. It is capable of advanced Synthetic Aperture Radar (SAR), Moving Target Indication (MTI), and Magnitude Change Detection (MCD). When paired with an airborne server, it can even produce SAR Motion Video (SMV). IMSAR adds value to its exceptional engineering with a production time much faster than industry standard. The NSP-8 is designed for durability and thoroughly tested with a Mean Time Before Failure (MTBF) of over 2,000 hours. Additionally, it’s weatherized for optimal performance over land and sea. With this sensor, IMSAR’s users can understand the bigger picture.

The PolarFire FPGA and PolarFire SoC families already deliver the industry’s best thermal and power efficiency in the mid-range segment. Optimized for deploying systems with high-compute performance in small form factors, the families have reduced the size and weight of power-constrained systems in applications including industrial imaging, robotics, AI-enabled medical systems and smart defense and aerospace systems.