o Detection substances Nerve: GA, GB, GD, GF, VX Blister: HD, HN3, L o Detection concentration G : ≤ 0.1㎎/㎥, ≤ 30 s VX : ≤ 0.04㎎/㎥, ≤ 30 s Blisters: ≤ 2.0mg/㎥, ≤ 30 s o Size: 185×165×285 mm o Weight: 4.5 kg or less

As domains converge and connect, new threats and opportunities emerge. By giving our service members every advantage for operational success, we create a safer world. It is this mission that drives our relentless innovation in defense technology. With our integrated expertise and capabilities, Raytheon Technologies is uniquely positioned to give our customers the advantage in every moment.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading worldwide supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors. Focused on defense and commercial technology, the Company develops, manufactures and supports a broad range of systems for over one hundred industries as well as mission-critical and military sustainment requirements over the globe. Our extensive design capabilities enable us to produce the most sophisticated technological units known in the Aircraft Ground Support Equipment (AGSE) profession.

HII has been recognized as one of the largest defense ground support equipment technology companies in the world. We hold leading market positions in ammunition loading systems, aircraft hydraulic system testing, aircraft cabin pressure testing, power systems, environmental control systems, military trailers, high-pressure gas and liquid systems, flow measuring equipment, and integrated logistics and support services.

Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet of production space. Our manufacturing facility is equipped with state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, full sheet laser and waterjet, automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices.

Maximum Control for your interactive graphical displays. Developing HMIs for safety- and mission-critical avionics and embedded displays only gets more demanding. VAPS XT offers HMI designers, systems engineers, and embedded engineers maximum control and flexibility for creating interactive real-time graphical displays for avionics and other safety-critical embedded applications. With an open architecture and integrated logic capabilities, VAPS XT provides the essential features for the design and deployment of certifiable cockpit displays. VAPS XT provides a model-based environment supporting all phases of development from initial concept to embedded deployment. Through a flexible porting structure, VAPS XT applications can be easily deployed to virtually any embedded target with excellent performance.

It is a product lineup that is proven in global markets and has world-class competitiveness. And it is being exported to more than 20 countries around the world.

Official Korean Distributor and Licensee of Parker Velcon, offering industrial filter systems and filter cartridges Filter vessels and elements (cartridges): Filter/separator vessel and cartridge, Moisture-absorbing Aquacon filter vessels and cartridges; Micronic filter vessels and cartridges (0.5 Micron to 25 micron), Natural Gas filter vessels and cartridges; etc.