• Band Width : L1/L5 or L1/L2 • Supported GNSS Constellations : GPS/Galileo/NavIC/GLONASS/BeiDou • Interference resistance : - Single jammer interference resistance up to 90 dB(J/S) - Multiple jammers interference resistance up to 82 dB(J/S) - Support of up to 3 jammers simultaneously for each of frequency bands • Interfaces : Digital output • Power Consumption : Low power consumption

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

ts advanced integrated optics and closed-loop Field Programmable Gate Array (FPGA) electronics deliver much higher accuracy, lower noise and greater efficiency than competing technologies. In addition, the EG-1300 can be calibrated internally for better thermal effect and has both digital and analog outputs, along with separation of the electronics from the FOG’s sensing coil assembly to accommodate the widest variety of installation parameters. Features Fully-integrated optics and electronics Advanced optics and FPGA electronics for higher accuracy, lower noise and greater efficiency Precise navigation (1 mile/hour without GPS) Fast, precise gyrocompassing to 1 milliradian Bandwidth to 500 Hz Separate electronics and sensor modules More economical than competing systems Applications Navigational grade applications Unmanned aerial vehicle (UAV) guidance Missile guidance Aeronautics and aviation Robotics

0.8m급 고해상도 초소형 지구관측 위성으로, 군집운용을 통해 고빈도 · 정밀 감시체계를 구축합니다. SpaceEye-M is a small satellite to produce high-resolution image data. A constellation of SpaceEye-M can perform precise monitoring over a large area with high revisit.

Integrated logistics support division, a Vendor Item Tool Manager, Consumables & Special Cutting Tools, Fixed and Rotary Wing String Lighting.

SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

Communication Antenna for Data and Voice Transmission

We manufacture and supply Solar Powered Insect Trap which is and effective solutions for insect control in crop fields. This cutting edge device identifies the Pest and Insects pattern and develops Pest Management and control plan accordingly. Our Solar Powered Insect Trap is very easy to install and operate. Solar Insect Trap offered by us is completely automatic, economical and eco-friendly device. The most advanced Ultra violet luring light secure increased capturing rate than the normal blue LED or fluorescent light in the market In addition, state of the art LED luring light offers virtually unlimited life span unlike the traditional black fluorescent light