Features - Excellent waterproof performance with double sealing structure. - Beam expansion application technology application. - Can be applied to deep-sea environments. Application Area - ROV (Remotely Operated Vehicle) - Underwater Optical Communication - Renewable Energy - Underwater Drone

This pouch is designed to store mission-essential equipment during operations. It provides efficient storage for magazines, IFAKs, radios, and other critical gear. Hesed Korea’s tactical pouches are constructed from durable 500D Cordura fabric and feature modular compatibility for attachment to plate carriers.

Korean Commander’s Panoramic Sight Specification MODEL: SRBM-1702-60 APPLICATION: K1A1 KCPS SIZE: Φ163.8(I.D)/Φ233.5(O.D)85.6L NO. OF RINGS: 60RINGS TYPE: BORE ROTATING: CW/CCW MASS PRODUCTION ITEM (2009~ )

HPW series is a medium density PCB connector with mixed signal and power contacts, up to 15A each. The HPW Series has been designed to resist to the high levels of shock and vibration in the harshest environments of the commercial aerospace and defense markets.

Frequency signal generator for precise target detection High-frequency resolution design and frequency conversion function using DDS method Main performance Frequency: L-Band ~ Ku-Band Accurate Chirp and Pulse Mode Output Level: +0dBm min Spurious: -40dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 50dBc Min Applicable fields Guided weapon tower system and radar system can be applied

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

1. Feature - An equipment combining visible and short-wave infrared (SWIR) cameras, capable of daytime reconnaissance, surveillance, and target acquisition, applicable to various systems. - It can be mounted on and integrated with various types of weapon systems. - With SWIR mode, targets can be monitored, tracked, and acquired even in conditions with haze, fog, or dust.