Main advantages of the PBS ECS systems include the possibility of cooling, heating and ventilation in one system, minimal power consumption, ecological operation without the need for a coolant and a compact design. Specific applications of the ECS systems include light combat aircraft AERO L-159 ALCA, jet trainers AERO L-39NG and L-39 Albatros, etc.

Various line up, high torque frameless motor capable of precise speed and position control. Application areas are Collaborative robots, Dog Horse robots.

Our clamping division manufactures parts to secure external lines and tubes to the landing gear fitting and oleo.

Integrated Soldier Power / Data Hubs are Personal Area Network (PAN) hub and interconnect systems providing network data access, peripheral connectivity and smart battery power management for dismounted soldier C4ISR electronics in Digitally Aided Close Air Support (DACAS) missions, including precision targeting, tactical radio communications, real-time video downlink, night vision technologies, GPS/navigation, blue force tracking, personal computing and smart phone integration.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

- RWR receiver inspection and antenna performance measurement - EW receiver inspection - Check the azimuth and signal power of the RWR receiver

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.

Model-Based Systems Engineering (MBSE) is a methodology that integrates design, analysis, and verification activities throughout the system lifecycle using architecture models. By modeling requirements, functions, structure, and behavior, MBSE supports consistent and informed decision-making. Ansys SAM (System Architecture Modeler) supports the latest system modeling language, SysML v2, and enables both graphical and textual modeling, real-time collaboration, and model management. Ansys ModelCenter integrates various engineering tools and builds automated workflows, enabling what-if simulations and trade studies. By connecting architecture models with simulation models, it supports consistent design analysis and requirements validation using a single source of truth (ASoT).