High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

- Swarm (Multicopter) : 20 Drones/ 1 swarm - Endurance : Rceonnaissance Drone: 23mim. / Loitering munition: 23mim. - MTOW : 2.4kg - Payload : 600g (Leader: EO/IR/LRF, Attack Drones : munition ) - Size : 300x360mm - Control Range : up to 5km

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

A Very High Resolution (0.75 m GSD) and Wide-Field of View (24 km swath) optical payload under development. Designed for microsatellite integration, Chouette combines sub-meter detail with wide-area coverage, a unique balance that expands the scope of commercial EO applications beyond what current systems offer.

Key Features - Frequency Range: 8.5 - 10GHz - RX Noise Figure: 3.0dB - RX Small Signal Gain: 21 dB - TX Small Signal Gain: 27dB - TX High Pout: 39dBm - TX High PAE: 37% Chip size: 2.9x2.5x0.1mm  

NVIDIA IGX is a cutting-edge AI platform delivering high-performance, secure, and reliable computing. Built on autonomous-driving expertise, it supports industrial automation and medical devices, with PCIe expansion for extra vision inputs and full-stack enterprise-grade software and long-term support.