Our software enables engineers to analyze and optimize their preliminary designs in the best way possible – at the whole aircraft level – which not only saves time but money as well. With its Multi-disciplinary Analysis and Optimization (MDAO) approach, you can model aircraft and their subsystems, assess performance, and generally accelerate your progress in numerous design challenges. Whatever your aircraft preliminary design goals may be, Desmo has a solution.

PROJECTS KSS SONAR System KDX-III SONAR System Wire-Guided Heavyweight Torpedo Harbor Underwater Surveillance System (HUSS) ITEMS Transceiver cabinet assembly

InspecX is a next-generation autonomous swarm inspection system for aircraft. It is addressing challenges in the $100B global aviation maintenance market. Airlines face a shortage of certified technicians, with Boeing projecting demand for over 700,000 by 2044. Aircraft-on-ground (AOG) incidents cost $10,000–$150,000 per hour, making downtime reduction critical. InspecX uses swarm coordination and LiDAR-based SLAM to perform safe inspections in GNSS-denied or indoor environments. It reduces required technicians from 9 to 3 and inspection time from 10 hours to 3, achieving over 50% cost savings for large aircraft. Beyond efficiency, InspecX helps airlines avoid AOG losses, accelerates maintenance cycles, and improves airworthiness. By maximizing fleet readiness and ensuring reliable operations, it provides a scalable, future-proof solution. InspecX is positioned to become the new global standard for aviation safety and maintenance in the era of intelligent mobility.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Key RADAR in counter-fire warfare to defeat enemy artillery by reversely tracing the trajectory of ballistic missile. Design and Manufacture - Environmental Control Unit - Driving unit - Generator - TR module rack & Antenna Case

AI autonomous mission-performing drone - Drone performing autonomous defense/interception missions using Deep Reinforcement Learning technology - Drone platform for development (can be provided separately) - Drone H/W specifications

Identification Friend or Foe is an identification system designed for command and control. It enables military and civilian air traffic control interrogation systems to identify aircraft, vehicles or forces as friendly, and to determine their bearing and range from the interrogator. Raytheon Intelligence & Space has more than 80 years of experience in IFF.

AI-based Intelligence, Surveillance and Reconnaissance Equipment