Dynamic Load Carriage® system Dim. : 6.5" W PALS webbing for MOLLE attachment Patented Ballistic Vein® Composition Material : 500D Cordura® + ARAMID / PV® Size : SMALL 26" - 30" MEDIUM 29" - 33" LARGE 32" - 36" XLARGE 36" - 40" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

The EPNR2000 is a backpack-style, portable base station integrating CU-DU-RU, with a 5G Core and application (IP-PTT) server built in. All 5G network elements are combined into a single unit, allowing it to operate as a standalone base station (IOPS), making it an ideal system for providing communication in areas inaccessible by vehicle, such as disaster sites or military operations.

The JW22992 connector was developed for the purpose of high-power transmission with demanding military standards and exhibits IP67-grade water and dust resistance. It is also designed in the range of 40 to 200 amps and is used for high-power military and industrial equipment that requires the highest reliability. Key Features: High Power Transmission, Designed to handle high currents, Robust construction It provides a stable connection with five key grooves and two-line screws.

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.

The engine is suitable for MALE AUVs. Available in pusher and tractor configurations. Digital interface for control and monitoring. Stable operation at high altitudes and high temperatures. Ability to run at cold temperatures below -30°C without preheating.

Haigh-Farr specializes in the design, manufacture, and testing (electrical and environmental) of conformal and non-conformal antennas. As a leader in the aerospace industry, our antennas are found on the latest high-performance airborne and space vehicles. Haigh-Farr is well known for its reliable, high-quality range of customizable and off-the-shelf solutions.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The SC6G0 series supports 4K60 hardware compression and UVC video output, with power options via PoE or USB Bus Power. Its built-in SoC delivers 2.5 AI TOPS, enabling seamless YOLO AI tool integration. This design streamlines system setup and connectivity, boosting flexibility and deployment efficiency across diverse AV applications.