It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

• Toggle switches • Circuits breakers • Illuminated push buttons • Relays / Relays bases. • Potentiometer.

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

DIESTONE DLV is a next-generation cleaning solvent for aerospace and industrial surface preparation. With 70% VOCs, controlled volatility, low odor, and no chlorinated hydrocarbons, it ensures operator comfort and safer workshops. Its high flash point (49 °C / 120.2 °F) reduces fire risks while maintaining powerful cleaning and degreasing performance on metals and composites. Non-corrosive on light alloys, DIESTONE DLV also provides reliable reactivation of epoxy and polyurethane primers before painting, bonding, or sealing. Approved to key aerospace standards, including Boeing BSS 7432 and SAE (ARP1755B, AMS1528, AMS1536), it is trusted by OEMs and MROs worldwide. Available in multiple packaging formats, from bulk containers to pre-saturated wipes, it offers flexibility for both manufacturing and maintenance operations.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

The Cardinal 1280 is a high-definition SWIR InGaAs detector featuring a 10μm pixel pitch. This detector offers high resolution and sensitivity, enabling EO/IR systems to capitalize on the SWIR spectrum for low-light imaging and extremely long-range daytime surveillance, even in challenging weather conditions like smoke, dust, fog, or rain. It incorporates SCD's advanced Asynchronous Laser Pulse Detection (ALPD) technology. A Thermo Electric Cooler (TEC) is included for optimal performance of the Focal Plane Array (FPA) in low light level scenarios. SCD is committed to standing alongside our customers, ensuring they receive the finest solutions available.

- Minimizing the station's door opening and closing time to support drones' quick entry and exit. - Structural design to minimize noise and vibration when opening and closing the door - Design and implementation of an interface for interaction between an automatic door system and a drone. - Automatically opening and closing door system - Automatic detection of drones through cameras and sensors, and safe storage and charging functions