The Fibre Channel D-sub connector series features a multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is extremely low contact resistance when measured from the contact outer body to the connector flange. The Fibre Channel D-Sub series also delivers superior performance ensuring minimal RF noise and high durability up to 1,000 mating cycles, while meeting and surpassing all requirements of MIL-STD-202 for shock and vibration. Offered with 150 Ohm quadrax contacts, the connectors are available with 2, 4, 6 or 8 way insert arrangements. Additionally, D-Sub connectors feature ease of assembly, and a robust and comprehensive training package. To ensure that the correct high speed connectors are mated to address specific wiring requirements and keying functions, a keyed jack post option has been incorporated into the design. The six-positioned post allows for 36 possible keying combinations assuring that the correct Fibre Channel D-Sub plug is mated to the correct high speed receptacle. Non-keyed jack post versions are available as well. Fibre Channel D-Sub connectors feature size 3 quadrax contacts which are 30% larger than the size 9 configuration utilized in the 100 Ohm quadrax, ensuring a matched impedance signal throughout the contact mated pair at 150 Ohm differential impedance. These features ensure that Smiths Interconnect's Fibre Channel D-Sub connectors deliver the critical edge customers require.

ORSKOREA’s high frequency grinding spindles, operating at speeds up to 120,000 rpm—the highest level in Korea—are engineered for ultra-precision and durability in critical defense and aerospace applications. In addition to belt-driven, built-in motor, hydrostatic, and hydrodynamic types widely used in semiconductor and precision equipment, our spindles are customized to deliver the exact speed and power output required by customers. With over 25 years of expertise in repairing and retrofitting leading Japanese, German, and Swiss brands such as TOYO, KOYO, OKUMA, GMN, and Fischer, and with multiple proprietary patents including joint developments with Schaeffler Korea, ORSKOREA ensures proven reliability. These spindles are ideal for machining high-value defense components such as armored vehicle gears, drone actuators, aircraft engine parts, multispectral sensor housings, and advanced optical or communication devices, supporting the competitiveness of both defense and civilian manufacturers.

Aviation piston, cylinder, airplane bolts and nuts Tank engine block , Tank nozzle and cover, single wiper driving unit, Balkan parts, composite wrench, 60mm mortar, 4.2inch mortar, 90mm recoiless rifle, 2.75"rocket warhead, 81mm mortar, target for shooting range

Quapason™ is a high-performance vibratory gyroscope from Safran Electronics & Defense, combining the compactness of MEMS with the reliability of Fiber-Optic Gyroscopes (FOG). It delivers exceptional robustness, ultra-low noise, and high signal stability, making it ideal for stabilization and inertial navigation in harsh environments. Used in weapon turret stabilization, avionics, and artificial horizons, it has surpassed 140,000 units delivered, proving its reliability and precision across civil and military applications.

The new Super-TAC IMU integrates three fiber optic gyros that exceed tactical grade performance with three high-accuracy Micro-Electro-Mechanical Systems (MEMS) accelerometers and state-of-the-art support electronics in a single small, lightweight package. This solution addresses the need for superior inertial performance in a tactical- grade package, critical for operation in GPS denied and contested environments. The Super-TAC IMU measures change in velocity and angle, utilizing a configurable variable synchronous data link control (SDLC) digital serial bus. The Super-TAC is configured to offer customers the best value solution when designing new systems as well as provide the flexibility to upgrade existing platforms. The Super-TAC IMU employs state-of-the-art optics with fewer components, providing significant performance and reliability improvements across standard military environments. Background Emcore, located in Budd Lake, NJ has been designing, developing and producing inertial components, sensors and navigation systems for Space, Ground, and Avionic applications for over 35 years. Emcore has been developing Fiber Optic Gyros (FOGs) since the early 1990s, producing and delivering IMU products with performance ranging from tactical to strategic grade PERFORMANCE GYRO PERFORMANCE Bias Stability < 0.05 °/hr. (1σ) Angle Random Walk ( ARW) ≤ 0.01 °/√hr. (1σ) Scale Factor Repeatability ≤ 100 ppm (1σ) Scale Factor Linearity ≤ 50 ppm (1σ) Angular Rate Range 1,000 °/sec Acceleration Range 100,000 °/sec2 ACCELEROMETER PERFORMANCE Range ± 25 g Bias Variation ≤ 50 μg (1σ) Scale Factor Stability ≤ 300 ppm (1σ) SYSTEM PERFORMANCE Bandwidth (adjustable) 800 Hz (gyros) 150 Hz (accelerometers) MTBF >25,000 hr.

SAS(360° Situation Awareness System) is a day and night multi sensor system, giving the capability of 360 degree’s situational awareness in the battle field. SAS comes with an uncooled thermal camera as well as a day CMOS sensor supplying crew members in the vehicles with the information out of vehicle for better situational awareness. Each SAS camera provides 90° filed of view and up to 360° with more cameras onto the various kinds of vehicle. SAS-PTV(Panoramic Triple Vision) - Single and Duo (PTV-S / PTV-D) is the device that forces can be aware of 360° surrounding situation in the vehicles through It can me mounted onto M1A1/A2, K1A1/A2 and any other vehicles for optimal performance in complete darkness for driver and commander PTV-S or PTV-D with Wide Field of View provides an optimal image quality an situational awareness capability of the forces SAS comes with an uncooled thermal camera as well as a day CMOS sensor supplying crew members in the vehicles with high definition video for better situational awareness.

BERNIER designed the CMASD line specially for harsh environments. This line presents the same apreciated characteristics than the CMA connectors in a smaller shell in which can be set up to 8 contacts. Its ergonomics and toughness enhances headsets and handsets use and its construction allows high speed data communication. . Applications RADIOS – ACCESSORIES – INTERCOMS – CRYPTED DATA – OPTRONIC DEVICES – WEAPON SYSTEMS – RUGGED COMPUTERS – TACTICAL EQUIPEMENTS

Our firm offers end-to-end GaN production capabilities, including fabrication, packaging, test, and failure analysis to meet custom requirements. To enable customer designs, a process design kit (PDK) is available with a design manual, sample layouts, and a non-linear device model. Options available include fabrication of customer-designed wafers (“PDK foundry service”) or custom design by TransEON and fabrication according to customer specs (“NRE foundry service”). For either option, volume levels available include pilot/engineering runs, multi-project wafers (MPWs), or full production runs.