ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

Spring probes are designed to optimize performance in high reliability, multicycle applications. Smiths Interconnect’s spring probes are compliant which makes them ideal for blind mate applications as they self correct for x, y, z, rotational and angular misalignment of the target. Offered in compressed heights less than 2 mm and utilized on pitches as tight as 0.4 mm, they are well suited for high density, board-to-board, battery contact and high frequency applications. Mixed signals and functionality can be designed into a single connector.

• Band Width : L1/L5 or L1/L2 • Supported GNSS Constellations : GPS/Galileo/NavIC/GLONASS/BeiDou • Interference resistance : - Single jammer interference resistance up to 90 dB(J/S) - Multiple jammers interference resistance up to 82 dB(J/S) - Support of up to 3 jammers simultaneously for each of frequency bands • Interfaces : Digital output • Power Consumption : Low power consumption

Thermostatic Temperature switches

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

- Provides accurate measurements of the trajectories of aircraft, guided weapons, separation of aircraft, and target encounters. - Using CW and FMCW

The ASN-157 was developed to meet the ongoing need for helicopters with reduced size and weight avionics. The ASN-157 system has an accuracy of 0.15 percent of total velocity, weighs less than 13 lbs., consists of one line-replaceable unit, and has a predicted mean time between failure of over 7,300 hours.

The personal pocket-sized ISR capability allows imediate situational awareness for soldiers executing dismounted operations globally. The system provides real-time live motion video back to the operator and the opportunity to take snapshots during missions.