The SC-SBCRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SBC627. When the SBC627 board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SBCRTM board into the back of the Backplane.

The 100W High Power Amplifier is an L-band amplifier that delivers 100W output across two channels with a 60% duty cycle. It offers a gain of over 50 dB, with output flatness of 2 dB depending on the input signal level. The amplifier provides an ACLR performance of -20 dBc at maximum output. Equipped with an output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

The SCFAN-CTRL-10U is an internal fan control module installed inside the chassis to provide advanced cooling control and system thermal management. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM), supporting up to two 12V @ 3.5A fans and seven 12V @ 2.5A fans. This module ensures stable cooling performance and system reliability for high-density VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, where it provides precise and efficient cooling control for mission-critical radar operations.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

With a proven track record of innovation, quality and reliability, Microchip continues to evolve as the foremost supplier of semiconductors to the aerospace and defense market. Our rapidly-expanding portfolio of highly-integrated technology supports the most demanding requirements for space, aviation and defense microelectronics. From radiation-hardened, space-grade solutions to advanced military and commercial aviation electronics, we've leveraged our expertise and product knowledge to build applications-based solution platforms that reduce integration risk, improve productivity and speed time to market. - More than 60 years of space flight heritage with products qualified to the highest government, DLA, NASA and ESA standards - Proven innovation, quality and reliability on aerospace platforms over the past 20 years - Legacy of trusted, reliable and cyber-secure supply chain for defense microelectronics

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.

Operate the automated artillery system according to the operating procedure. It is the highest level controller of the automated artillery system that collects status information from each unit device controller that composes the automated artillery system, diagnoses faults and builds a database. - VxWorks operating system - Operating system recovery function - Building a failure history database in the built-in SSD - Check unit control device status information through communication