1. Integrate the most effective aspects of Visible and IR(Infrared) image. 2. Increase the efficiency through the ability to use in all weather conditions, day or night, including fog.

Short-Wave Infrared(SWIR) Camera is an imaging device that detects reflected light in the 0.9–1.7 μm wavelength range. Compared to visible light, SWIR enables longer-distance observation and provides high-resolution imagery even in degraded visual environments, such as fog, haze, or dust, where conventional visible cameras cannot operate effectively. These capabilities are realized through the use of InGaAs sensors, offering precise detection and surveillance that are unattainable with visible-light imaging. Accordingly, SWIR cameras serve as an advanced imaging solution not only for military, security, and disaster response applications, but also for industrial inspection and research fields.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

- Seamless integration with all CAD models - Specialized for UAM and eVTOL design - Supports analysis of complex aerodynamic phenomena - Accurate prediction of airflow under subsonic and supersonic flight conditions - Detailed analysis of boundary-layer flow separation and viscous effects

We can manufacture products that comply with MIL-PRF and MIL-STD standards, and offer radiation-hardened designs, hermetic packaging, and Class S and Class K screening services. Space Satellite Communication Providing optimized performance in space radiation environments with radiation-hardened semiconductors and hermetic packaging solutions. Deep Space & Earth Observation Ensuring long-term mission reliability with high-reliability power management ICs, RF components, and Class K screening products. Launch Vehicle Electronics Providing rugged packaging and hermetic components that withstand extreme temperatures and shocks. Defense Missile & Precision Guided Munitions Ensuring lightweight and shock-resistant performance with miniaturized, high-reliability semiconductors and customized packaging. Electronic Warfare & Radar Providing high-performance components, including high-frequency RF components, power amplifiers, and high-speed digital ICs. Avionics & Secure Communications Providing EMI/EMC-compliant circuit protection devices and highly reliable power management solutions.

NICKEL 200 / 201 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY 400 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 Bars INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® Sheets and Plates INCONEL® Alloy 693 Sheets and Plates-Tubes and Pipes INCONEL® Alloy C-276 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 7 Bars-Sheets and Plates-Tubes and Pipes

External SSD drive with total data delete option by hotkey or red button push Highly robust solution due to the use of a full-aluminium chassis Highly customizable Native supported four inputs for Full HD SDI cameras

The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.