This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

The FLIR 380X upgrade sets the new standard for law enforcement mission support. Learn more: https://www.flir.com/surveillance/flir-380x-upgrade/

The HARD-20 Life Raft System is designed to provide maximum protection of the on-board life raft. The system is attached to the aircraft with a bulkhead mount and single-point release harness, enabling deployment by one person. Activation of the system is accomplished via static line mounted to the airframe or manually by a survivor in the water.

Temperature / Flame Resistant Seals Reinforced & Non-Reinforced Seals Vulcanized Bonding Custom Technical Elastomeric Solutions

Manufacture and delivery of main-part reflectors used in unmanned aerial vehicles.

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.

1. Feature - An equipment combining visible and short-wave infrared (SWIR) cameras, capable of daytime reconnaissance, surveillance, and target acquisition, applicable to various systems. - It can be mounted on and integrated with various types of weapon systems. - With SWIR mode, targets can be monitored, tracked, and acquired even in conditions with haze, fog, or dust.

This very compact optical system with an original design allows two groups of lenses to be moved in perfect coaxiality (+/- 1µm) over several millimeters. It is particularly recommended for applications requiring a constant alignment precision when moving the lenses. The perfect coaxiality of the lens holders is guaranteed by a common bore machined in a single operation. Numerous dimensional modifications allow a perfect adaptation to the optical design related to its application. Due to the use of perfectly adjusted ball cages, its low-friction translation mechanism is best suited for intense use and offers an unequalled lifetime without any particular maintenance.