With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

- A white light mounted on the rear side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

Vehicle-type RF Jammer Systems provide protection to VIPs and convoys against remote-controlled explosives. These systems create a protective shield through RF broadcasting and neutralize threats activated by radio, mobile phones and wireless remote-controlled devices. Vehicle-type RF Jammer Systems can be easily integrated aboard all kinds of vehicles, and allows for reprogramming against changing situations. Continuous broadband operation Control from hand terminal Module selection Malfunction warning VSWR warning

C-17 GLOBEMASTER III

HF Kit is a fully integrated high-frequency (HF) communications package built around the proven Rolatube mast technology and the PTS Raven sloping wire antenna. Designed to meet the demands of tactical, emergency, and field-based operations, this system enables long-range HF communications in a compact, lightweight format. The core of the kit is Rolatube’s 5m composite mast—made from a patented rollable material that provides excellent rigidity when deployed but can be rolled into a compact form for transport. This mast supports the deployment of the Raven antenna, a versatile and field-tested solution for HF communication, ensuring coverage across a wide range of frequencies. Whether used by military units, first responders, or remote industrial teams, the System 75: 5m HF Kit offers plug-and-play simplicity, quick setup, and reliable signal performance in the most demanding environments. Its portability and ease of use make it an ideal choice for teams requiring effective HF capability without the burden of traditional bulky infrastructure.

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

GIMPO has proactively driven the introduction of UAM to alleviate the traffic congestion and secure future growth engines, thereby preparing for the period of 700,000 GIMPO residents. Equipped with both air routes and infrastructure, GIMPO is optimal location to expand business and generate results in the uncharted UAM market with minimal risk. we will prepare for a UAM-centered future city through the development of the 'GIMPO ENVIRONMENTAL REGENERATION INNOVATION COMPLEX' and 'GIMPO HANGANG 2 COMPACT CITY'. Unlock new opportunities in GIMPO.

- 1 axis Fiber Optic Gyroscope - Bias Repeatability (over temp. range): ≤ 1.0º /hr (1σ, RMS) - Angle Random Walk: 0.035º /√hr (typical, 1σ) - Power Consumption: 1.3 W @ 25℃ (<2.4 W, @ -40℃) - Input Voltage: + 5 V - Weight: 165 g (0.36 lbs)