STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The Military Satellite Communication System-II is a basic communication system that uses the military's own satellites operating in geostationary orbit to ensure mobility and survivability through dedicated satellite communication terminals without the help of any infrastructure on land, sea, or air in the ROK Armed Forces' operational area, including the Korean Peninsula. The Military Satellite Communication System-II is a basic communication system that uses the military's own satellites operating in geostationary orbit to ensure mobility and survivability through dedicated satellite communication terminals without the help of any infrastructure on land, sea, or air in the ROK Armed Forces' operational area, including the Korean Peninsula. We supply various types of satellite communication terminal equipment and major component modules that can transmit and receive large amounts of data in real time without regional restrictions using military satellites to system/system companies. Among the main modules of various satellite communication terminal equipment of system/system manufacturers, we supply modems and subscriber matching devices Military Satellite Communication System-II High-speed basic link, anti-electronic warfare link, and low-speed basic link of all satellite terminals 7 types of modems and 7 types of subscriber devices for interworking provide large-capacity data transmission, anti-electronic warfare capabilities, and multi-channel links

RF Systems' advanced facilities support accurate performance testing and RF measurement of antenna. With specialized tools and expertise, we ensure consistent quality and verified performance in all key parameters.

KNF offers high qualified Aluminium products used in a wide range of markets around the world. *No.1 Stockholding & Qualified Aluminium Supplier *A1XXX/A2XXX/A3XXX/A5XXX/A6XXX/A7XXX Series and more *Business Areas: Aerospace & Defense / Semiconductor & Display / Marine & Silo / Automotive & EV Battery / Others

It can carry and deliver payloads of 5 to 10 kilograms, making it suitable for commercial and industrial logistics. The drone has been successfully tested in extreme environments, ensuring stable performance under harsh conditions. With its proven capability, PELICAN expands the possibilities of drone-based delivery solutions in both urban and remote areas.

The eco-friendly era, it all begins with the Energy Storage System. VITZROCELL's EDLC is a next-generation energy storage device that offers a high energy density and can be used semi-permanently.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.