Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers

R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.

Development of an integrated support system for total life cycle management of weapon systems

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

The engine offers a take-off power of up to 180 kW (235 hp). Excellent power-to-weight ratio. Small installation dimensions. Two outpu shaft speed configurations. Stable operation at high and low temperatures.