Modern avionics and vectronics rely on high data rate digital networks. As the demand for these networks keeps rising with new advances in aviation and military technologies, GORE® High Speed & Data Rate Cables from W. L. Gore & Associates provide the fast speeds and excellent signal integrity needed to support current and next-gen critical systems.

The EPNR2000 is a backpack-style, portable base station integrating CU-DU-RU, with a 5G Core and application (IP-PTT) server built in. All 5G network elements are combined into a single unit, allowing it to operate as a standalone base station (IOPS), making it an ideal system for providing communication in areas inaccessible by vehicle, such as disaster sites or military operations.

The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

Developed by MPS Microsystems, the voice-coil nano-positioner unites a Lorentz-force motor, flexure guidance and on-board electronics inside a 65 × 60 × 38 mm envelope. Standard travel is 2.88 mm, extendable to 7 mm with the same coil, suiting microscope objectives, small mirrors and sensors that demand friction-free motion. Bidirectional repeatability stays within ±1 µm over a 360 µm stroke and ±2.5 µm across the full stroke. We can tailor mounting plates, objective clamps and cable exits to suit your specific requirements, ensuring that this voice-voil actuator can be integrated seamlessly into your system.

The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. #UAV #UAS #UAM #UGV #UUV #USV

It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. Similar to the arresting hook method used to land an aircraft on an aircraft carrier, the UAV is caught by a pendant and braked, and a net is also added in case of an emergency.

When your missions take you into extreme environments, the Bell 412 will always have your back. With the cabin you need for passengers and cargo, nothing and no one will get left behind.

12kW DBC HEL Source for C-UAS