Visionary Machines 3D passive optical sensor - Pandion Sentinel, detects, tracks, identifies and targets drone and Robotic Autonomous System (RAS) threats. Delivering unprecedented accuracy and stealth, maximising mission survivability for the close in fight. Pandion Sentinel creates a critical perimeter safety dome, delivering an advanced solution to the increasingly complex threat drones pose to military and civilian safety.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Gas-to-liquid heat exchangers, also known as air-to-water or water-to-air heat exchangers, are critical in high-performance environments where efficient thermal management determines reliability and output. They are widely used in applications such as engine charge air cooling, exhaust gas heat recovery, avionics thermal control, cryogenic fluid conditioning, and high-temperature gas handling.

Whether satellites, spacecraft or space debris – GESTRA, the "German Experimental Surveillance and Tracking Radar", is a state-of-the-art radar system for observing and tracking objects in space. It operates in the microwave range and explores the Low Earth Orbit of 300 to 3,000 kilometres, i.e. the range in which most satellites and the International Space Station (ISS) are located. This makes it possible, for example, to protect space systems or the ISS from a collision with debris particles by providing a timely warning. Millions of tiny particles orbit the earth and, at a speed of around 28,000 km/h, pose a threat to active space technologies. GESTRA was developed and built by the Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR on behalf of the German Space Agency at DLR.

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

Designed with durability in mind, the SG20BL is equipped with a robust M8 circular connector, hardened steel gears and an impressive IP-68 rating, ensuring it can withstand harsh environmental conditions while maintaining optimal performance. With a Mean To Time Failure (MTTF) of greater than 1,000 hours, users can trust our servo to deliver consistent functionality throughout its operational lifespan. Available in both a 12V and 24V model with wide operating voltages of 9-15V and 18-32V, respectively, the SG20BL also features an ultra-efficient brushless motor delivering exceptional power-to-weight ratio and a contactless magnetic encoder offering enhanced responsiveness. The implementation of CAN 2.0A,B / DroneCAN command protocols further streamlines communication and integration with advanced unmanned systems. #UAV #UAS #UGV #UUV #USV

The beginning of national defense and security, it has been recognized for its reliability and stability. VITZROCELL's Military batteries meet stringent military performance requirements and are applied in defense systems and smart weapons.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.