Thermostatic Temperature switches

This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

Ultra-High Density: With a pin spacing of 0.025 inches, it achieves maximum miniaturization and lightweight design. Ultimate Reliability: Designed to ensure perfect signal integrity even in harsh environments. Durability: Boasts outstanding environmental resistance that meets military and aerospace standards.

Kappa’s Armor Eye product family of advanced rugged camera solutions offers maximum flexibility for customized and program-specific DVE and SAS designs and integrations. The high-performance rugged vision solutions can be specifically configured according to the vehicle type and the mission tasks. We offer affordable Entry Level (EL) and very sensitive and wide dynamic High Quality (HQ) camera products. Benefit from our project-specific flexibility to adapt view angles and DRI performance for the best operational performance, day- and night 24/7. Turnkey Solution - DVE- und SAS Systems with DVU - Digital Video Distribution Unit DVE systems with up to two cameras can be built as direct camera-monitor systems (CMS). For the integration of a larger number of cameras, our advanced VDU represents the signal processing core for all Kappa’s turnkey AE DVE & SAS systems. This high-speed and digital FPGA based processing core offers multiple HD-SDI camera inputs and several HD-SDI outputs for lowest system latency performance glass-to-glass. Additional control and H.264 IP streaming interfaces greatly increase the VDU flexibility and enable information sharing between vehicles. Controlled by the crew or the gearbox switch, the VDU processes the selected camera channels, mixes and scales multiple camera information, performs driver assistance and tactical overlays of text and icons, and fi nally routes the selected view data to the respective output for display on the cockpit monitors. Best in class signal processing techniques and scaling algorithms guarantee the low latency generation of crisp and sharp images even under severe difficult ambient light conditions. Day & Night Vision (VIS/LWIR), image fusion, near-zero latency, scalable solutions up to 360° surround-view, adaptable FoV.

Nas-52 or Night Attachable Sight gives law enforcement and military personnel the versatility in operations through attaching simple night vision device prefixed to daytime sight which makes available to engage in surveillance or to acquire targets regardless of ambient light conditions. NAS-52 is a clip-on system designed to mount in front of any kinds of daytime riflescope, and it gives daytime riflescope the night vision capability. Sniper or designated shooter using daytime scope will significantly need this performance for night time operation.

The SCVPX-SSGM (Synchronous Signal Generation Module) generates synchronization signals to coordinate the operation and timing of various radar system components. It can generate synchronization signals using an internal clock, receive an external clock, or regenerate synchronization signals from external sources to maintain precise timing cycles. A device driver program is required for configuration and operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, providing precise timing synchronization across mission-critical subsystems.

Input : 24VDC Output : 270VDC N+1 System

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617