The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.

Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.

- Specialized in manufacturing Miniture ball screw - Shaft diameter 4mm~20mm - Precision grade C0~C7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 90% or higher

- Comprehensive High-Frequency Electromagnetic Simulation - Analysis of ships, submarines, aircraft, fighter jets, and satellites including antennas - EMC and EMP analysis including cables - Radome and multi-antenna interference analysis - Wireless coverage, network planning, and spectrum management

# Key Features - Map Generation and No-Drive Zone Setting in Airports > Airport map/sensor fusion-based localization function > Function for defining main movement and standby areas > No-drive zone setting - Optimal Path Autonomous Driving Function > Destination-based optimal path navigation > Speed limit settings by path and area > Real-time location monitoring > Obstacle detection and immediate response > Driving on diverse road surfaces within designated areas - Real-Time Bird Detection and Bird Position/Direction Prediction > Real-time bird detection > Support for approximate bird position/direction prediction based on object detection algorithms > Updating of approximate bird position/direction prediction based on flock detection - Effective Bird Deterrence Reflecting Bird Characteristics > Playback of diverse (randomized) acoustic patterns - Real-Time Communication with Operator and Manual Control Function > Monitoring console (PC) provides real-time bird detection status and history > Display of approximate bird position/direction predictions on a map > Real-time video data sharing > Remote manual control - Smart Charging Function > Automatic return and charging when mission is complete or battery is low

Optimized Friction Materials: Ensures consistent braking performance under diverse operational conditions. Extended Service Life: Designed to reduce wear and improve cost-efficiency for operators. Enhanced Safety & Reliability: Engineered to comply with global aviation standards for maximum operational safety. Sustainable Technology: Developed with advanced manufacturing processes that minimize environmental impact.

C-UAS and Advanced Threats 70kW CBC HEL Effectors

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.