*Perfect automatic camera matching for all types of vision cameras. * Fully supports the Camera Link interface (Area/Line Scan). *User-friendly,No need to modify firmware for frequency compatibility. *Compatible with "10 TAPS@85MHz" internal/external RS232C, all baud retes(20MHz~85MHz),and digital user IO. *Compatible with Base/medium/Full configurations. *Provides camera power from the Tx box. *SFP type module *Works with moving and non-moving fiber cables.

The main function of the ball screw is to convert the rotational motion of the actuator to linear and it boasts a small precision and high strength. also implements a precision driving with minimal backlash.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

· Based on proven KSS-III submarine, highly reliable platform · Full lithium-ion battery system with over 7 days submerged endurance without snorkeling · Integrating X-rudder configuration to enhance maneuverability and control performance · Dedicated SOF Lockout Trunk optimized for special force operations with inflatable boats, engines and gears for all SOFs

The high-reliability DC-DC onverters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. SynQor’s innovative QorSeal® packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these converters operate at a fixed frequency, have no opto-isolators, and follow conservative component derating guidelines.

BAE Systems is bringing together decades of demonstrated cross domain know-how and expertise in integrated flight controls and propulsion solutions to enable the next generation of aircraft. We are investing in the development of highly reliable, flight and safety critical systems that will enable the future of hybrid and all-electric aircraft.

Its unique tail-sitter design enables vertical takeoff and landing while maintaining fixed-wing efficiency during flight. The drone achieves high-speed performance and extended flight distances, making it ideal for wide-area monitoring. With its advanced endurance and adaptability, GOSHAWK delivers reliable intelligence in both tactical and strategic operations.