Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W. It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion. Transmit functions also include ALC (Automatic Level Control) and over-temperature protection. On the receive side, the module selects one of two input channels and performs downconversion. It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level. The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less. Both transmit and receive paths include built-in path self-test functions.

Our software enables engineers to analyze and optimize their preliminary designs in the best way possible – at the whole aircraft level – which not only saves time but money as well. With its Multi-disciplinary Analysis and Optimization (MDAO) approach, you can model aircraft and their subsystems, assess performance, and generally accelerate your progress in numerous design challenges. Whatever your aircraft preliminary design goals may be, Desmo has a solution.

From the rocket launcher to its upper assembly, the bomb rack unit, completing a full weapon system as one set. The rocket launcher is a weapon system independently designed to launch guided missiles or rockets through 7-tube and 19-tube launchers, enabling both single and multiple firings. Through its development, independence of the weapon system has been secured, and structural stability has been achieved by applying a design that considers aircraft vibration and aerodynamic effects. In addition, it is equipped with the capability to receive the system’s firing signal and ignite the rocket. Based on the successful development in 2017 of the 7-tube 2.75-inch rocket launcher assembly for helicopters, the company is now independently developing upgraded versions of the 7-tube and 19-tube rocket launcher assemblies. Through this effort, we are securing scalability for application to next-generation helicopters and UAV systems.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Designed and manufactured to ensure flawless connection between precision striking functions, even in extreme temperatures, varying altitudes, and impact environments.

METRAVIB PEARL is a miniaturized acoustic gunshot detection system initially designed for infantry and dismounted soldier who is in direct contact with the enemy. PEARL provides the capability of finding in a few seconds and in a very intuitive way the origin of the shots that are threatening them. The PEARL system can be installed, using a Picatinny rail, on an assault rifle, a sniper rifle, a machine gun or multifunction goggles/sights. An intuitive interface composed of directional LED arrows shows the azimuth and elevation of the threat. Compact and wireless, PEARL is easy and fast to get started with.

CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.