The 200W High Power Amplifier is an L-band amplifier that delivers 200W output with a 60% duty cycle. It provides a gain of over 53 dB, with output flatness of 2 dB depending on the input signal level. At maximum output, it offers ACLR performance of -20 dBc. With a built-in output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

The Glenair next-generation STAR-PAN NG ecosystem incorporates a range of new capabilities in direct response to requests from JTACs, special operations forces, mission commanders, and other military specialists. Design innovations in STAR-PAN NG have resulted in higher current-carrying capabilities, greater versatility in power input support, and real-time plug-and-play USB device integration. The STAR-PAN NG hub and cable series offers a number of interface improvements and circuit board innovation.

Threaded bushing enables localized reinforcement of and attachment to panel structure. Supplied with disposable installation fixture. 1.25" Flange Diameter. SIZES: Imperial fine thread sizes from 10-32 (.190"-32) to 3/8-24 (.375"-24), Imperial coarse thread sizes from 8-32 (.164"-32) to 3/8-16 (.375"-16), and metric thread sizes from M5 to M8. 1.25" Flange Diameter. Grip lengths from 0.25" to 1.50". MATERIALS: Aluminum, 300 Series Stainless Steel, A-286 Stainless Steel, 316 Stainless Steel, and Titanium. Optional epoxy primer. FEATURES: Standard 1.25" diameter flange, 0.75" x 1.25" trimmed flange optional.

- Inspection robot control and damage assessment for robot operators. - Pre-inspection information creation for inspection planning. - A 3D user interface for inspection robot status monitoring. - Damage assessment and result report generation capabilities.

NVS, Night Vision Scope is designed for individual soldiers and law enforcement personnel which has been already in operation all around the world. This device gives soldiers and law enforcement the versatility they need to engage in operations with optimum efficiency.

With an unrivalled pedigree of delivering the pilots of the future for air forces across the globe, Hawk is the world's most successful and proven military aircraft trainer - with operational capability.