Safran Engineering Services offer includes EWIS technology design and certification, electrical requirements management, electrical systems architecture, definition and wiring architecture, components definition (BOM), electrical wire harness assembly, installation design, electrical load analysis, 3D modeling / 2D drawing creation, manufacturing tools (Formboard), work Instruction development and wire harness installation design.

Safran Engineering Services was selected by Honeywell for the STC development for multiple rotorcrafts. Safran Engineering Services took responsibility as the design authority for the design, development, integration, installation, testing, tech pubs and STC approval under FAA, EASA and TC agencies.

< Frequency Range > ● 20 ~ 1000 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32 < Current (A) > ● 10 < Dimension > ● 177.1 x 95 x 30 (mm)

Designed with durability in mind, the SG20BL is equipped with a robust M8 circular connector, hardened steel gears and an impressive IP-68 rating, ensuring it can withstand harsh environmental conditions while maintaining optimal performance. With a Mean To Time Failure (MTTF) of greater than 1,000 hours, users can trust our servo to deliver consistent functionality throughout its operational lifespan. Available in both a 12V and 24V model with wide operating voltages of 9-15V and 18-32V, respectively, the SG20BL also features an ultra-efficient brushless motor delivering exceptional power-to-weight ratio and a contactless magnetic encoder offering enhanced responsiveness. The implementation of CAN 2.0A,B / DroneCAN command protocols further streamlines communication and integration with advanced unmanned systems. #UAV #UAS #UGV #UUV #USV

1. Technical collaboration leveraging KAI's expertise in Surion(KUH) and LAH helicopters 2. Expanding AMO maintenance types and repair/modification capabilities [Rotary Wing Business] - Periodic Maintenance for KUH-1 and MUH-1 - Modification & Installation/Periodic Maintenance for EC-225 - Periodic Maintenance for AW-139 - Performed assembly work for Bell's B-505 helicopters

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

It can carry and deliver payloads of 5 to 10 kilograms, making it suitable for commercial and industrial logistics. The drone has been successfully tested in extreme environments, ensuring stable performance under harsh conditions. With its proven capability, PELICAN expands the possibilities of drone-based delivery solutions in both urban and remote areas.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.