GE Aviation's Systems business is equipping militaries with the solutions needed to succeed. As a leading supplier of integrated systems and technologies for combat aircraft, military transport, helicopters, land vehicles and unmanned aerial vehicles (UAVs), GE is enabling armed forces around the world to improve reliability and enhance operational performance.

The RES3000 is a compact, rugged fully managed Layer-2/3 Ethernet switch, optimized for SWaP and VICTORY-compliant military/industrial deployment, offering 12–24× 1 GbE (plus optional 4× 10 GbE), rich protocol support via OpenWare™, and wide-range rugged certifications. • Form factors: 12× 1 GbE (~2 kg), 24× 1 GbE (~3 kg), or 24× 1 GbE + 4× 10 GbE • Features: IPv4/IPv6 routing, OSPF/RIP/VRRP, VLAN (up to 4096), QoS, multicast, PTP, BIT, DoS prevention, sanitization, OOB mgmt. • Ruggedized: Conduction/convection cooling, MIL-STD certifications, −40 to +71 °C • Compliant with VICTORY networking architecture

- Dimensions (L x W x H): 40 x 90 x 35 mm (receiver + antenna array) - Weight: 120g (receiver + antenna array) - Power Consumption: 3W - Constellations: GPS, Galileo, GLONASS, BeiDou, NavIC - Frequencies: L1/L5 or L1/L2 - Interference Resistance: Single jammer up to 90 dB (J/S)

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

Features Solid-state, maintenance-free, modular components for optimal mounting of controls, sensor, and display Automatic compensation ensures the highest degree of accuracy (±1º) LCD display with adjustable backlighting for easy viewing in all conditions Variable control of electronic damping for use in rough seas Meets demanding military standards for years of reliable performance Dual compensation for degaussing on and off Applications Naval vessels including aircraft carriers, battleships Smaller naval boats Amphibious craft

Orbit’s TT&C ground stations antenna must function flawlessly in order to provide a narrow beam width link in one-time single opportunity, flight test event. Add this factor to the turbulent weather that is often present at the ground station locations, and you are looking at a formidable hurdle. Orbit provides fixed, transportable, and portable antenna systems that feature auto-track, RSSI-track and GPS track tracking modes, unsurpassed tracking accuracy and durability to deliver the stable connection required for dependable data throughput. Our stabilized T&T antenna systems work in extreme temperature conditions (-40°C to 55°C) and in rough weather, for example, at base stations that are close to the ocean or on high mountain ranges.