The semi-automatic ViscoTec mix-on-demand station is already in successful use as a mobile system. For reliable mixing and dosing of two-component materials, in situ. Two-component materials are commonly processed using premix cartridges, hardener rod cartridges or by mixing two components by hand. The disadvantages are obvious: The risk of human error, enormous material waste and high production costs offer every reason for taking the automated route. With ViscoTec filling stations, epoxy resins, polysulfides and polyurethanes can be removed from larger containers and filled on-demand with the exact quantity required. The dosing is volumetric on a component or a filling container. A typical application is dosing in so-called inserts (thread inserts). The compact arrangement of the components on a mobile frame guarantees the operator maximum flexibility. The design as a stationary system has already been implemented several times.

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

Glenair Signature Interconnect Innovations for Land, Sea, Air, and Space Applications

We, STX Engine, started with our business to be designated as a defense company in 1977 and established a factory for defense purposes in 1988. Moreover, we have grown into a largest defense diesel engine manufacturer by licensing with MTU. Based on the aforementioned fact, we manufacture and provide diesel engines for main battle tank, self-propelled artillery and armored vehicle to ROK Army, for destroyer, frigate, patrol vessel and support vessel to ROK Navy, for patrol vessel to Korea Coast Guard as well.

Today, space satellites are moving away from RF Analog based payloads providing low speed telecommunication signaling, to a new Digital Transparent Processor architecture for high throughput satellites. Those architectures increase the demand for rugged and higher speed connectivity. To meet those industry needs, Smiths Interconnect has developed the NXS Series, an advanced high speed, high density interconnect to provide next generation data on demand. Equipped with the Hypertac® hyperboloid contact technology the NXS system can withstand data rate application up to 50 Gbps (per channel) requirements, including extreme levels of vibration, shock and climatic testing above 2100 g. The NXS Series is designed in a robust construction with 4 or 12 high speed quadrax (dual-twinax) modules. The recent EMI Flange addition provides the extra benefit of reducing electromagnetic interference. Each ultra-high density quadrax module contains 2 dual twinax at 100 Ω each pair. It is blind mateable, hot pluggable, with ultra-low mating forces and low outgassing materials. In addition, the solderless PCB mount design reduces the customer’s risk and cost of ownership. The connector is mounted after reflow and has no impact on nearby components.

CI Systems사의 는 I-레벨 광학 테스트 및 실험실 테스트를 수행하는 데 이상적인 장비입니다. 소형이기 때문에 휴대 가능하며, 컴퓨터화되어있어 차량에 설치할 수 있습니다. 열화상 장비 및 가시광 센서에 대한 종합적인 테스트를 현장에서 할 수 있어 D-레벨 시설 없이도 테스트를 효율적으로 수행할 수 있습니다. 콜리메이터, 방사선원(블랙바디, 가시광 광원), 타깃 휠(수동 또는 전동)로 구성되며, CI Systems의 CTE 소프트웨어와 연동 시 간편하고 객관적이며 반복성을 극대화한 테스트가 가능합니다. 환경 변화에도 높은 정확도를 유지하며, 환경 챔버 테스트, 생산 라인 테스트, 현장 테스트 등 다양한 환경에서 활용할 수 있습니다. The CI Systems ILET (Intermediate-Level Electro-Optical Tester) family of test systems is ideally suited for performing I-level optical tests and laboratory testing. Portable, compact and computerized, ILET testers can be installed on a vehicle, bringing comprehensive testing of thermal imagers and visible light sensors to the field, reducing the need of D-Level facilities. The basic ILET configuration includes a collimator, a radiation source (blackbody and/or visible light source) and a target wheel (manual or motorized). The ILET is easy to use when interfaced with CI Systems’ CTE software (optional), minimizing testing turnaround time and maximizing testing objectivity and repeatability. The testers retain their accuracy over a wide range of ambient temperatures. Thanks to the ILET’s outstanding features and versatility, it is useful in a variety of applications such as testing in environmental chambers, testing on production lines and testing in the field..

The specifications for vessel design, manufacture and inspection comply with the ASME standard of the USA, as well as the standard of the Korea Gas Safety Corporation. These vessels are manufactured and exported to countries all over the world.

SCD’s advanced 12μm VOx Microbolometer stands out as the ideal choice for VGA LWIR systems. With its exceptional image quality, remarkably low Noise Equivalent Temperature Difference (NETD), very low time thermal constant (Tau), rapid image acquisition, and minimal weight, SCD’s Microbolometer ranks among the leading LWIR sensors in the market. It is suitable for a wide range of applications, specifically tailored to meet challenges associated with Size, Weight, Power (SWaP) constraints and highly dynamic applications. This product continues SCD’s long heritage uncooled detectors technology, along with our 25μm and 17μm pitch families, fielded and combat proven for more than 20 years.