The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

Gas-to-liquid heat exchangers, also known as air-to-water or water-to-air heat exchangers, are critical in high-performance environments where efficient thermal management determines reliability and output. They are widely used in applications such as engine charge air cooling, exhaust gas heat recovery, avionics thermal control, cryogenic fluid conditioning, and high-temperature gas handling.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

A wire in military or aerospace applications is a conductor used to transmit electrical power or signals between components in aircraft, vehicles, or defense systems.

Mechanical Characteristics: Faster Hob Spindle and Zero Backlash Builtin Torque Motor for C Axis and Zero Backlash Both Wet Cutting / Dry Cutting Supported Application of the High-Speed Ring Loader

This solution leverages LLM-based data interpretation technology to detect process anomalies in advance, providing alerts and countermeasures before defects occur, thereby ensuring sufficient response time. It also analyzes issues such as positional misalignment or print degradation patterns during the process, matches them with various event timelines, identifies the root causes of defects, and delivers the findings in the form of analytical reports

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.