SURI-A is a compact design thermal sight based on high performance infrared detector meeting military grade requirement. It uses a lightweight un-cooled thermal imager and advanced optic providing soldiers a one-stop solution for reconnaissance, patrol and engagement, regardless of light and battle field conditions. It is a versatile, multipurpose sight that is compatible on a broad range of Fire Arms.

The CAS-500(Compact Advanced Satellite), phase #1 project is the project in which KAI aims to develop a CAS500-1 by operating a joint design team with Korea Aerospace Research Institute(KARI) and to transfer the government’s satellite development technology to the industries. Then, KAI initiates the development of the CAS500-2 project and establish the industry-led development as well as mass-production infrastructure.

- Fire response time: 0.004 seconds - Fire monitoring range: cone angle of 90° or greater - Equipped with self-diagnostic function - Capable of distinguishing between major fires and minor fires

Input : 24Vdc Output : 270Vdc N+1 System

Our advanced mine detector combines photochemical and metal detection technologies, enabling the identification of both metallic and non-metallic mines. Selected in December 2024 for the Global Small but Strong Enterprise Development Program by KRIT, this cutting-edge system is now under development. Backed by a Letter of Commitment from Ukraine, it is set to play a key role in reconstruction and humanitarian demining efforts.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

[Infrastructure long products] For the cutting of high-performance materials and titanium alloys, the Service Center Switzerland has 9 powerful circular and band saw machines for precise cuts up to a diameter of 350 mm. BIBUS METALS AG has had experience in cutting special grades since the company was founded in 1979. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Deburring of bar blanks - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Chamfering and pointing of bars [Infrastructure flat products] The BIBUS METALS Group has machining facilities at several locations in order to implement professional processing of customer requirements. We use specialist sheet/plate shears for high-performance materials and titanium alloys up to a sheet thickness of 12 mm. In addition, the group has one of the largest fully automatic plate saws in Europe. The Behringer type LPS 25-125-6A saw can cut titanium plates up to a size of 2000 x 6000 mm and a thickness of 150 mm according to the customer's requirements. Waterjet cutting is carried out with our own machines or in cooperation with selected partner companies. - Series and individual cuts of all available materials in the shortest possible time - Blanks for sample material testing - Marking according to customer instructions - Re-stamping certificate by SVTI (Swiss Association for Technical Inspection) available on request - Shearing up to 12 mm thick - Sawn for panels up to 150 mm thickness with tolerances of -0/+3 mm - Circles/rings or any shapes according to drawings will be water jet cut or precision water jet cut

Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.