The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Our radars’ low-Size, Weight, and Power (SWaP) means ample room for other onboard sensors, such as Electro-Optical and Infrared (EO/IR) cameras. Users no longer need to decide which sensor to include and which to exclude. Instead, they can understand the bigger picture. Highly reliable, the NSP-3 has a recommended maintenance interval of 1,250 hours. It can gather data over land and maritime environments and can be used for applications as broad as sea ice monitoring and search and rescue, as well as specialized intelligence, surveillance, and reconnaissance (ISR) missions.

< Frequency Range > ● 500 ~ 2700 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32.5 < Current (A) > ● 14 < Dimension > ● 208.3 x 91.4 x 26.9 (mm)

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

- Detects fire through heat sources when installed in areas where optical fire detectors are difficult to apply, such as in the presence of contaminants or obstructed visibility - Capable of detecting fire even if the sensing line is severed - Length can be adjusted depending on the equipment applied

LiFi is a technology that uses 'light' to transmit data instead of using conventional radio waves. LiFi is attracting attention as a future communication technology that can complement or replace the widespread WiFi. LiFi will be applied for the first time in the civil aviation industry and bring great innovation to in-flight communication and entertainment. LiFi's ultra-connectivity, ultra-security and ultra-resiliency are key elements that will enable LiFi technology to 'spin-on' to the defense industry.

The SmartVDO Eye series AI cameras use the NVIDIA® Orin™ NX Super platform, offering a comprehensive, all-in-one AI monitoring solution. The NeuroEye-I series, designed for industrial inspection, features Sony high-resolution, high-sensitivity sensors and supports both rolling and global shutters for capturing detailed, high-quality images. The NeuroEye-S series, built for environmental safety, offers autofocus, auto-aperture, low-light night vision, and IP66 protection, ensuring reliable operation in harsh conditions. Combined with YUAN’s powerful AI development kit, QDEEP, AI models can be rapidly deployed and customized to enhance operational efficiency.