- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. Linear Acceleration Compensation Certus Mini uses an innovative algorithm to compensate for linear accelerations. This allows Certus Mini to maintain accurate roll and pitch through short term linear accelerations that typically cause significant errors in competitors systems. For long term linear accelerations Certus Mini supports the addition of an external GNSS receiver for full acceleration compensation. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

The nose wheel assembly refers to the complete integrated unit consisting of the wheel, tire, axle, bearings, and associated structural components. In some configurations, it also includes steering mechanisms, shock absorbers (oleo strut), and braking systems (for specific aircraft types). The assembly is engineered for durability, precision, and reliability, enabling the aircraft to safely absorb impact forces during landing and provide accurate steering during taxiing.

Illumia XAVA is an authoring and planning tool that enables trainers to create customized training content, including interactive learning materials, lecture materials with knowledge checks and AI-driven Q&A support.