The Improved Fire Control System (IFCS) PNU / Universal Fire Control System (UFCS) UPNU family represents a true state-of-the-art system approach. Its design features permit ready adaptation and/or optimization to any current or future weapon system or sensor requiring precision pointing and positioning. The PNU / UPNU and its variants point the way for the future direction of the land navigation systems. Utilizing advanced sensors, electronics, software and aiding (GPS and odometer), the PNU / UPNU family delivers precisely what the Army of tomorrow needs — a system designed to remain operationally effective and affordable to support well into the future. Features High-performance RLG-34 ring laser gyros Common architecture and components (Paladin, PIM, Firefinder, IPADS) Embedded 12-channel Selective Availability Anti-Spoofing Module (SAASM) Impervious to jamming (inertial mode) Resistant to jamming (GPS-aided mode) Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Multiple Launch Rocket System (MLRS) High-Mobility Artillery Rocket System (HIMARS) Pointing and position location

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.

- Swarm (Multicopter) : 20 Drones/ 1 swarm - Endurance : Rceonnaissance Drone: 23mim. / Loitering munition: 23mim. - MTOW : 2.4kg - Payload : 600g (Leader: EO/IR/LRF, Attack Drones : munition ) - Size : 300x360mm - Control Range : up to 5km

GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

At #Honeywell, we're transforming the way the world works through technology and software. Learn about our legacy of firsts spanning 130 years, from our #fut...

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Designed to deliver the highest level of performance, the non-ITAR TAC-450-360 IMU includes our exclusive photonic integrated chip (PIC) technology. The high-performance TAC-450-360 IMU is designed for applications in which high bandwidth, low latency, and low drift are critical. The TAC-450-360 IMU is integrated with inertial-grade accelerometers and three axes of magnetometers to provide the high accuracy levels that leading autonomous and manned platforms demand. Highlights Designed for ease of integration with flexible interface settings and programmable message outputs Excellent performance in critical applications and the specs that matter most Improved SWaP plus robust performance and survivability Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology* reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-360 IMU provides the safe, accurate performance autonomous platforms demand.