Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

SEMIL-2000GC is an extreme-rugged IP69K dustproof and waterproof edge AI platform in a 2U 19" rack-mount form factor. SEMIL- 2000GC incorporates Neousys' best-in-class thermal design to ensure fanless maximum GPU performance in wide range -40°C to 70°C temperatures. The system is also integrated with an NVIDIA® L4 GPU that offers up to 2.5 times the performance over Tesla T4.

EMCORE’s TACNAV Light is a field-proven digital compass-based battlefield navigation system. Type-classified by U.S. SOCOM and designed specifically for non-turreted vehicles, TACNAV Light offers: Highlights GPS backup and enhancement, vehicle position, hull azimuth, and steer-to/cross-track error displays One of the lowest cost tactical navigation systems available Improved operational effectiveness and increased force OPTEMPO Application Features Compass for the highest degree of accuracy and unjammable position and navigation information Dead reckoning and odometer interface for accuracy to within 2-3% of distance traveled Digital interface with Battle Management Systems for improved situational awareness Uses TACNAV Universal Multilingual Display (UMD) capable of presenting data in virtually any language Applications Light military vehicles The TACNAV Light is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR, 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

CATIS™ is an ultra-high-resolution, small satellite imaging radar device independently developed by Lumir. It consists of three components: the radar signal transmission/reception device SCEU, an active phased array antenna SATA, and a data downlink antenna KaPA. This X-band imaging radar device is designed for small satellites weighing 150 kg, offering an ultra-high resolution of 0.3 m. It transmits wideband RF signals to the observation area while orbiting at an altitude of 500 km and receives the reflected signals to acquire Earth observation data.

GAIN CRITICAL CLARITY WITH SATELLITE TASKING Task ICEYE SAR satellites to access groundbreaking data on any location on Earth – day or night and in any weather. The process is simple and images are usually delivered within 24 to 48 hours of your initial request. ORDERING SAR DATA – MADE SIMPLE We believe access to reliable and timely SAR Earth observation data should be available to all, so we provide access options designed to meet your specific mission needs and collection timeframes. The process begins with defining your area of interest, revisit frequency and other parameters. The first images are usually acquired, downlinked, decoded and processed within 24 hours of the initial request and delivered within 8 hours after that.

LEMO T-Series watertight connectors offer durable construction in a package specifically designed for outdoor applications. Learn more: https://www.peigenesi...