- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

ENGINeUS™ Aircraft Electric Motors are self-contained direct drive propulsion power pods. This modular and scalable machine allows an easy integration into a vehicle whilst maintaining optimization of the propulsive function of new mobility platforms and hybrid turbomachinery.

Two-lug nutplate with bracket-retained nut element for FOD-critical applications where nut replaceability is desired but nut element retainer clips are not permitted. Supplied with integral elastic installation fixture. Fixture simplifies nutplate installation by providing bondline clamp-up and maintenance of concentricity with the fastener hole, ensuring full availability of nut float and protection of threads from adhesive.

Low Insertion Loss, Good IMD Performance RF Coaxial Switches: SPST to SP8T Switches, Transfer Switches from DC to 200 GHz Power Dividers and Power Combiners Wilkinson Types from 2 to 16 Ways Frequency Range from 400 MHz to 26.5 GHz

The nose wheel assembly refers to the complete integrated unit consisting of the wheel, tire, axle, bearings, and associated structural components. In some configurations, it also includes steering mechanisms, shock absorbers (oleo strut), and braking systems (for specific aircraft types). The assembly is engineered for durability, precision, and reliability, enabling the aircraft to safely absorb impact forces during landing and provide accurate steering during taxiing.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

The PNT500 is a rugged 3U VPX Assured Position Navigation and Timing(A-PNT) module aligned with the SOSA profile, offering multi-constellation QinetiQ Q40 GNSS, PTP Grandmaster timing, OCXO/CSAC fallback, and ruggedized reliability. • QinetiQ Q40 multi-GNSS receiver with anti-jamming/spoofing • IEEE 1588 PTP Grandmaster; OCXO or CSAC timing fallback, 1 PPS and reference outputs • Rugged single-slot 3U VPX, SOSA-aligned