The QRS116 is a compact angular rate sensor ideally suited for applications in tactical, aerospace and mission-critical instrumentation. The QRS116 features exceptionally low noise, fast start-up, and a simple electrical interface, the QRS116 has no moving parts ensuring long service life and high MTBF. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec Input Voltage + 5 Vdc ±5% regulation Short Term Bias Stability (100 sec at const. temp) 3 deg/hr Output Noise ( DC to 100 Hz) ≤ 0.002°/√Hz* * Values Indicated are for ±100°/sec. Range Features Exceptional Bias Stability Unprecedented Low Angle Random Walk Values Superior Vibration Performance Compact Industry-Standard Package (Same as QRS11) Rugged, Compact Package Integrates easily Applications Tank Turret Stabilization Defense Fixed Wing Defense Helicopter Unmanned Aerial Vehicles UGV – Unmanned Ground Vehicle Platform Stabilization Camera Stabilization Antenna Stabilization ROV – Remotely Operated Vehicle

The RES3000 is a compact, rugged fully managed Layer-2/3 Ethernet switch, optimized for SWaP and VICTORY-compliant military/industrial deployment, offering 12–24× 1 GbE (plus optional 4× 10 GbE), rich protocol support via OpenWare™, and wide-range rugged certifications. • Form factors: 12× 1 GbE (~2 kg), 24× 1 GbE (~3 kg), or 24× 1 GbE + 4× 10 GbE • Features: IPv4/IPv6 routing, OSPF/RIP/VRRP, VLAN (up to 4096), QoS, multicast, PTP, BIT, DoS prevention, sanitization, OOB mgmt. • Ruggedized: Conduction/convection cooling, MIL-STD certifications, −40 to +71 °C • Compliant with VICTORY networking architecture

Our product range includes caps, chains, adapters, and locknuts, all manufactured through advanced CNC machining to ensure long-lasting performance even under frequent assembly and disassembly. These accessories are widely applied in electronics, aerospace & defense, and medical devices, where durability and reliability are critical. With the ability to provide customized designs and precision machining, we guarantee consistent quality, fast delivery, and compatibility with international standards, earning long-term trust from global clients.

The EPNR1000 is a drone-mounted 5G base station integrating CU-DU-RU, with 5G Core and an IP-PTT application server built in. All 5G network elements are combined into a single unit, allowing standalone operation (IOPS). Mounted on a drone, it can provide line-of-sight coverage over obstacles like buildings or mountains, making it an ideal system for delivering 5G services over wide areas during disasters or military operations.

Precision Molded LWIR lenses using Chalcogenide glass "High-Volume & Cost Effective Manufacturing" High performance Diffractive-Aspheric LWIR(@8~12μm) lenses Athermalized Fixed Focus: FL 8.1, 15, 18mm / F# 1.0 High Efficiency AR(Anti-Reflective) Coating Technique for LWIR Applications: Thermal Imaging and Thermography

- System Construction - U-Caster-HT: Network video transmission device - KASSO® server: Connects Tx and Rx in a cloud environment, streams video to the receiving device, and manages connected devices (settings, transmission/reception connections, etc.). - Video receiving device: MonaLisa-Rx device (U-Caster-HR) or computer/smartphone - Receiving playback software: Web browser or WebRTC streaming playback program

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

Electro-Optic Targeting Unit is optimized to be used as an imaging system for Remote Control Weapon Station as a targeting Unit. This unit also performs as a long range surveillance unit for any kinds of vehicles in the environment of heavy fog, dust and complete darkness at night and in the day time User can detect targets in complete darkness condition. - Wide field of view with optional lens (HFOV 90°) - Applicable to various platforms of vehicles. - Cooled / Uncooled thermal detector. (640 x 480) - Measuring target distance using laser range finder.