The MIL-DTL-5015 series of connectors were developed as military standard connectors and applied to various military equipment, it is also used in general industries, medical care, electric vehicles, robots and automation facilities based on its high durability and reliability. This series is threaded coupling and the connection between the contact and the wire is based on soldering. It can be used compatibly with third-party products of the same standard since it is produced according to military standards.

- Reduced weight and manufacturing cost by more than 30% compared to conventional metallic propellant tanks - Designed and qualified to according KARI requirements - Proof & burst pressure application - Cyclic pressure(MEOP, Max. Enveloped Operating Pressure) application, more than 40 cycles

The Defence Technological and Industrial Bases is indispensable for maintaining peace and security. After all, it provides an armed force with services and equipment. If it does not, the armed forces are left hobbled. This also applies to the Dutch armed forces. Nevertheless, the defence and security sector is experiencing difficulties in accessing private finance. Referring to Environmental, Social and Governance (ESG) criteria, companies in the sector would not be able to access private financing from pension institutions, insurers and financial service providers. Because of the same criteria, the sector is experiencing difficulties in opening accounts with private banks. Below is summary on the current state of the issue.

Processor - NXP Quad Core PowerPC QorIQT2080 up to 1.8GHz - 6 DMIPS/MHz per core (up to 43,200 DMIPS@1.8GHz) - 128b AltiVecSIMD unit (up to 72 GFLOPs@1.8GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 3U OpenVPX - Conduction-Cooled

The EPNR2000 is a backpack-style, portable base station integrating CU-DU-RU, with a 5G Core and application (IP-PTT) server built in. All 5G network elements are combined into a single unit, allowing it to operate as a standalone base station (IOPS), making it an ideal system for providing communication in areas inaccessible by vehicle, such as disaster sites or military operations.

Additive manufacturing: - allows highly efficient, compact recuperators with custom flow paths, maximizing energy recovery and reducing overall system emissions. - charge air coolers enhance cooling performance with tailored airflow designs, reducing intake temperatures and boosting engine efficiency. - delivers precise, space-efficient pre-coolers and heaters, ensuring optimized thermal response and energy efficiency for various industrial applications.

The RES3000 is a compact, rugged fully managed Layer-2/3 Ethernet switch, optimized for SWaP and VICTORY-compliant military/industrial deployment, offering 12–24× 1 GbE (plus optional 4× 10 GbE), rich protocol support via OpenWare™, and wide-range rugged certifications. • Form factors: 12× 1 GbE (~2 kg), 24× 1 GbE (~3 kg), or 24× 1 GbE + 4× 10 GbE • Features: IPv4/IPv6 routing, OSPF/RIP/VRRP, VLAN (up to 4096), QoS, multicast, PTP, BIT, DoS prevention, sanitization, OOB mgmt. • Ruggedized: Conduction/convection cooling, MIL-STD certifications, −40 to +71 °C • Compliant with VICTORY networking architecture

Main Fuel Control, Servovalve, Switches, Indicators, Starter Generator, Power Unit, Gas Turbine, Control Unit, Ice Detector, Blade, Advanced Flight Control Computer, Manifold Assembly, Main Battery, Ring Bearing, Power Supply, Motor, Sensors